We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26A25H14 TIGEAR-2 worm gear speed reducer featuring 25:1 ratio, 1.4375" hollow bore output, 3-piece coupled input, 140TC flange mount, 2.6" center distance. Cast iron housing with green paint. 2.26 HP input, 1677 in-lb torque output. - Ratio: 25:1
- Center Distance: 2.6"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.4375"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2.26
- Output Horse Power: 1.86
MODEL 26A25H14
Contact supplier for technical support on: +1-864-284-5700
$1,948.37 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
2.2600 hp, 1.685 kW
Horsepower rating output
1.8600 hp, 1.387 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
2.26
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
25
Output
Hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
1.86
Output shaft
Hollow
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Hollow
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1677 in/lb, 1677.0 in/lb
Ratio
25 to 1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
3.0000 hp, 2.237 kW
- Gear Type: Worm gear design for right-angle power transmission
- Ratio: 25:1 speed reduction
- Output: 1.4375" hollow bore for direct shaft mounting
- Input: 3-piece coupled for easy motor separation
- Frame: 140TC NEMA C-face flange
- Center Distance: 2.6" for compact installation
- Power Rating: 2.26 HP input capacity
- Torque Output: 1677 in-lb
- Construction: Cast iron housing with synthetic lubricant
- Applications: Belt conveyors, mixers, packaging equipment, general industrial drives
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read more
#5009577
Brand
Dodge
Model
26Q25H14LT
#142517
Brand
Dodge
Model
26Q25H14
#144060
Brand
Dodge
Model
26A25H14WP
#144074
Brand
Dodge
Model
26A25H14
#151539
Brand
Dodge
Model
26Q25H14WP
#142517
Brand
Dodge
Model
26Q25H14
#144060
Brand
Dodge
Model
26A25H14WP
#5009577
Brand
Dodge
Model
26Q25H14LT
#151539
Brand
Dodge
Model
26Q25H14WP
#6001072
Brand
Winsmith
Model
U2625HM14
| Brand | Lubriplate |
| Model | L0085-040 |
| Brand | PT Coupling |
| Model | SPS100086 |
| Brand | E-Z Lok |
| Model | T2015 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/