Image for Illustration purposes only. Actual product may vary
H732-60E-H-P35 Cast Iron Worm Gearbox
- Ratio: 60:1 Single Reduction
- Center Distance: 3.2"
- Input: 0.875" Input Shaft
- Output Bore/Shaft Diameter: 2.1875"
- Output: Hollow Bore
MODEL H732-60E-H-P35
Contact supplier for technical support on: 888-999-9860
$2,274.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Bore/Shaft Diameter
2.1875"
Center Distance
3.2"
Input Size
0.875"
Input Type
Input Shaft
Output Type
Hollow Bore
Reduction
Single
Product Features
- The 700 Series' large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
- Its multi-position mounting flexibility allows for installation in virtually any position.
- Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
- Internal baffles assure positive, leak-free venting.
- The 700 Series' rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
- Boston Gear's 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
- 700 Series' high-strength steel output shaft assures capacity for high torque and overhung loads.
- Pipe plugs allow easy fill, level, and drain in any mounting position.
- The 700 Series' super-finished oil-seal diameters on both input and output shafts extend seal life.
Specifications
- 11 basic single reduction sizes
- 8 basic double reduction sizes
- 1/6 - 25 HP
- 5:1 - 100:1 ratios single reduction
- 100:1 - 3600:1 ratios double reduction
- Non-flanged, NEMA C-face quill, and coupled input styles
- Projecting and hollow output shafts
- Projecting diameters from 1/2" to 2-1/4"
- Hollow output bore diameters from 5/8" to 3-7/16" (with over 20 bore sizes in stock)
SKU: 35104
12d.p. 14t spur gear
This item was closer to exactly what I needed than I had thought possible to find in the last 75 or so years. quite affordable, too. I almost didn't look, but when I did, there it was. I had in hand in just a couple of days.
Read moreSKU: 34746
Fast shipping
I ordered this part hoping it would arrive within 2 weeks because I had an emergency situation with an employee waiting to repair a piece of equipment at a customer’s location. The part actually arrived halfway across the country in 5 days including the weekend. MRO processed, packaged and shipped it with incredible speed. Thanks again!
Read moreSKU: 37408
New lead screw gear.
Used this gear on a new lead screw l made for my old 1919 LeBlond belt drive lathe. It worked great for my application.
Read moreSKU: 6132994
Speed reducer purchase
The purchase was easy it did take two purchase until we got the correct part I guess it was a fault on both parts as we were looking at the wrong part number, but overall the purchase was good part fit perfectly. Thanks for your support.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 35104
12d.p. 14t spur gear
This item was closer to exactly what I needed than I had thought possible to find in the last 75 or so years. quite affordable, too. I almost didn't look, but when I did, there it was. I had in hand in just a couple of days.
Read moreSKU: 34746
Fast shipping
I ordered this part hoping it would arrive within 2 weeks because I had an emergency situation with an employee waiting to repair a piece of equipment at a customer’s location. The part actually arrived halfway across the country in 5 days including the weekend. MRO processed, packaged and shipped it with incredible speed. Thanks again!
Read moreSKU: 37408
New lead screw gear.
Used this gear on a new lead screw l made for my old 1919 LeBlond belt drive lathe. It worked great for my application.
Read moreSKU: 6132994
Speed reducer purchase
The purchase was easy it did take two purchase until we got the correct part I guess it was a fault on both parts as we were looking at the wrong part number, but overall the purchase was good part fit perfectly. Thanks for your support.
Read moreItem must be unused.
Item must be in it's original package.
25% Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/