We never sell your data to third parties
Gates 14MGT-2660-37 Poly Chain GT Carbon Belts
MODEL 14MGT-2660-37
Contact supplier for technical support on: 303-744-5800
$606.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#2233516
Brand
Gates Rubber
Model
14MGT-2660-68
#11595
Brand
AMI Bearings
Model
UCFCS210-32
#14275
Brand
AMI Bearings
Model
UCFC208
Belt Back Side
Ribbed
Belt Height (in)
0.39
Color
Blue
End
Endless
Fabric Material
Nylon
Height (in)
0.236
Length (mm)
2660
Material
Polyurethane
Minimum Pulley Diameter
139.81 mm
Number of Teeth
190
Pitch (in)
0.552
Pitch length (in)
104.72
Reinforced Material
Carbon
Section
14M
Series
9274
Sided
Single Sided
Sprocket Comptab
Poly Chain GT
Standard Width
YES
Static Conductive
No
Temperature Range
-65 to 185 deg F
Tooth Height (in)
0.24
Tooth Profile
Curvilinear
Width (in)
1.457
Gates Poly Chain GT Carbon synchronous belts have a renowned industry reputation for high performance and huge cost savings in a range of applications, designed to handle longer center distances at high load-carrying capacities. Gates uses patented Carbon Fiber tensile cords for increased horsepower rating, compactness, and flexibility, while also allowing the use of backside idlers. When combined with Gates Poly Chain GT2 sprockets, you'll have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
- Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.
- Fully operational in temperature extremes of -54°C to +85°C (-65°F to +185°F).
- High power density with a lightweight, clean-running construction.
Application advantages you can count on.
Our Poly Chain GT Carbon belt drives have immediate impact on your application, with proven success stories, performance and savings metrics from operations all over the world.
energy savings over V-belts
5%higher power ratings than previous constructions
30%efficiency for life of the drive
99%greater capacity than HTD belts
400%Features and Benefits
- Our patented, curvilinear tooth profile provides high shear strength, noise reduction, and improved load-carrying capacity.
- Equivalent capacity to roller chain drives in the same width.
- Easy, rust-free wash-down with Gates Stainless Steel hardware.
- Fast drive conversion payback. Quieter than roller chain drives.
- Lubrication, re-tensioning and maintenance free.
No questions match your search.
How do I read a Gates 14MGT Poly Chain GT Carbon part number, and which sizes are standard? This product
The part number gives pitch, pitch length in mm and width in mm, so 14MGT-1750-37 is a 14mm pitch belt, 1750 mm long (125 teeth) and 37 mm wide. Gates lists standard 14mm lengths from 14MGT-994 (71 teeth) to 14MGT-4410 (315 teeth) in five widths: 20, 37, 68, 90 and 125 mm. Matching sprockets use the 14MX code: 14MX-36S-37 is a 36 groove sprocket for a 37 mm belt. The smallest stock 14mm sprocket in Gates' tables has 28 grooves.
Can a Gates PowerGrip GT4 14MGT belt replace a Poly Chain GT Carbon 14MGT belt? This product
No. Both carry 14MGT in the part number, but Gates states that any Poly Chain GT Carbon belt must run on Poly Chain GT2 sprockets (14MX code) of the same pitch, while PowerGrip GT4 is a rubber belt for PowerGrip GT2 or GT4 sprockets. The widths differ too: Gates lists Poly Chain 14mm in 20, 37, 68, 90 and 125 mm and PowerGrip GT4 14mm in 40, 55, 85, 115 and 170 mm. PowerGrip numbers put the length first (1610-14MGT-85); Poly Chain puts the pitch first (14MGT-1610-68). Older GT3 numbers such as 3150-14MGT-55 carry over unchanged to GT4.
What if I need a 14mm Poly Chain belt longer than 4410 mm? This product
Standard 14MGT stock lengths stop at 4410 mm. Above that, Gates makes Poly Chain GT Carbon Extended Length belts, coded with EL after the length: 14MGT-6160EL-125 is a 14mm pitch belt, 6160 mm long and 125 mm wide. Gates applies the EL process to 14mm and 19mm pitch belts over 4410 mm, in endless lengths up to 20, 000 mm, and says to use Taper-Lock Poly Chain GT2 sprockets when designing a new EL drive. MROSupply lists 40 sizes from 4578 to 9660 mm. These are not stock-table sizes, so confirm availability of the exact belt before planning a shutdown around it.
What is the difference between Gates 14ADV (Poly Chain ADV) and 14MGT (Poly Chain GT Carbon) belts? This product
Poly Chain ADV is Gates' next step in the Poly Chain line, identified by a red nylon tooth facing. Gates states it carries about 15 percent more load than Poly Chain GT Carbon and intends it as a replacement on drives that need more capacity in the same space. It is 14mm pitch only, and Gates specifies Poly Chain GT2 14M sprockets for it, so it fits the same 14MX sprockets as 14MGT. Part numbers follow the same pattern with ADV in place of MGT, for example 14ADV-2730-37, in the same 20, 37, 68, 90 and 125 mm widths. Re-rate the drive in Gates drive design software before narrowing a belt on the strength of the extra capacity.
What belt mass constant do I enter on a Gates sonic tension meter for a 14mm belt? This product
Gates lists adjusted mass constants in grams per meter per mm of belt width. For 14mm Poly Chain GT Carbon it is 7.9, for 14mm PowerGrip GT4 it is 8.5, and for the older 14mm PowerGrip GT3 it is 9.7. Enter the belt width in mm (37.0 for a 37 mm belt) and the span length in mm. Gates says Poly Chain GT Carbon has such high resistance to stretch that the drive does not need re-tensioning or take-up after installation, so getting the installation tension right matters.
Belt 5vx940
Verified · SKU 1248999Excellent Speedy Service. TLC Will continue doing business with MRO. Read more
Great price on gates belt
Verified · SKU 5932923Great price and fairly quick shipping. Read more
Office manager
Verified · SKU 2231058Works just like its suppose to. Read more
Office manager
Verified · SKU 2231058I got exactly what i ordered. Works like its suppose to.. Read more
#2986325
Brand
Timken Belts
Model
14MXT-2660-37
#2012848
Brand
Jason Industrial
Model
2660PLT14M37
#252889
Brand
Martin Sprocket
Model
4CTF14-10
#2408894
Brand
Winsmith
Model
E13MDDS3V120EK
#2941247
Brand
Cortina
Model
03-747Y
#832233
Brand
TB Woods
Model
4430V560
#6263183
Brand
Royal Products
Model
43460
#6235894
Brand
Reiff & Nestor
Model
45734
#1835723
Brand
Thomson Linear
Model
XCF7-2514
#96928930
Brand
DURUS
Model
DRS 25X38X6 C
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.