Gates 93872180 2/8V1800 Super HC PowerBand Belts

• Strands: 2
• Cross Section: 8V
• Sectional Top Width: 1"
• Total Top Width: 2"
• Depth: 7/8"
• Outside Circumference: 180"
• Material ID: 93872180

When uptime is a must, equip your drives with Gates Super HC PowerBand belts. Super HC PowerBand belts offer a solution for drives where single belts vibrate, turn over or jump off the pulleys. With a superior combination of flex and load, the PowerBand construction consists of multiple V-belts joined together by a permanent, high strength tie band that functions as a single unit. This means a tougher, more stable solution with even load distribution and each strand fitting securely in the sheave groove.

• Highly resistant to tensile and flexing forces, fatigue and shock loads.
• High stability and smooth running on the toughest drives.
• Temperature Range: -30C to +60C (-22F to +140F).

Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC V-belts also have exclusive Gates construction features for longer life on your drives.

• Aramid tensile cords combine limited stretch with extraordinary strength and durability that is pound-for-pound stronger than steel. Flex-bonded cords are strongly secured to the body of the belt for equal load distribution of bending stress without cord deterioration.
• Distinctive green backing provides protection with machined sidewalls that provide even sheave groove contact for smooth operation, less slip and reduced wear.
• Patented Ethylene compound and optimized notches molded into the belt during manufacturing increase flexibility for compatibility with small diameter sheaves.
• Tested to transmit an average of 50% more horsepower than standard Super HC Molded Notch belts. Available on demand in Matched sets (not V80 program eligible).
• Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.

BRING ON THE VIBRATION.

Because your Super HC PowerBand belt can handle it. Gates Super HC Powerband belts are engineered for drives where single belts vibrate, turn over, or jump off the pulleys, and work best for operations subjected to pulsating loads. The Powerband technology consists of several V-belts joined together by a permanent, high strength tie band, thus providing more powerful, tougher performance than all the belts taken separately.

Features and Benefits

• Flex-Bonded tensile cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
• Flex-Weave cover is a patented fabric construction for longer life, providing extended protection to the belt core from oil, dirt and heat.
• Concave sidewalls provide proper cord support and full contact with the sheave-groove for equal loading and uniform wear.
• Gates Curves provide full contact with pulley grooves for uniform loading of cords, uniform wear and increased belt life.
• The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
• Strong band controls belt-to-belt distance and prevents sideways bending.
• Super HC PowerBand is available in SPB, SPC, 3V(9J), 5V(15J) and 8V(25J) sections.

STABLE. SMOOTH. EFFICIENT.