We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 93876280 6/8V2800 Super HC PowerBand Belts - Strands: 6
- Cross Section: 8V
- Sectional Top Width: 1"
- Total Top Width: 6"
- Depth: 7/8"
- Outside Circumference: 280"
- Material ID: 93876280
When uptime is a must, equip your drives with Gates Super HC PowerBand belts. Super HC PowerBand belts offer a solution for drives where single belts vibrate, turn over or jump off the pulleys. With a superior combination of flex and load, the PowerBand construction consists of multiple V-belts joined together by a permanent, high strength tie band that functions as a single unit. This means a tougher, more stable solution with even load distribution and each strand fitting securely in the sheave groove.
- Highly resistant to tensile and flexing forces, fatigue and shock loads.
- High stability and smooth running on the toughest drives.
- Temperature Range: -30C to +60C (-22F to +140F).
MODEL 6/8V2800
Contact supplier for technical support on: 303-744-5800
$3,070.01 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
40
Belt Back Side
Smooth
Belt Inside
Smooth
Cogged
No
Color
Black
Cord Material
Polyester
Depth
7/8 in
Depth (per rib)
7/8 in
Effective Length (in)
276.68
Material
Chloroprene
Minimum Pulley Diameter
15.916 in
Number ribs
6
Outside circumference (in)
280
outside length
280 in
Reinforced Material
Flex-Bonded Polyester
Section
8V
Series
9387
Sided
Single Sided
Static Conductive
Yes
Temperature Range
-30 to 180 deg F
Thickness (in)
0.98
Top width
1 in
Top Width (in)
6.63
Top width (per rib)
1 in
Type
Banded Heavy Duty
| Category Name Description | The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. |
|---|---|
| Features Advantages | Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Meets ARPM / RMA IP-3-2 oil and heat resistant standards. Meets ARPM / RMA IP-3-3 static conductivity requirements. The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive. Concave sidewalls provide proper cord support and full contact with the sheave-groove for equal loading and uniform wear. |
| Markets/Applications | Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive. |
| Size Range/Availability | Large Inventory of standard lengths and widths are readily available. See sizing table for details. Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed. Made-To-Order Belt Lengths are available in any size from: 3V (45 to 220 inch), 5V (50 to 660 inch) and 8V (100 to 660 inch). Check with Customer Service for minimum order quantity and manufacturing lead time. |
| Outside Circumference (in) | 280.00 |
|---|---|
| Recommended Sheaves | Super HC Sheaves |
| Standard Pack | 1 |
|---|---|
| Weight (Lbs.) | 64.73 |
|---|
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read more
#833768
Brand
TB Woods
Model
6/8VP2800
#2021374
Brand
Timken Belts
Model
R8V2800-6
#676482
Brand
Bando
Model
6-8V2800
#1986356
Brand
Jason Industrial
Model
6/8V2800
#2244113
Brand
Bestorq
Model
6/8V2800
| Brand | Consolidated Bearings |
| Model | 94736 |
| Brand | Timken Belts |
| Model | 5V1500 |
| Brand | Dixon |
| Model | MF200 |
| Brand | Dixon |
| Model | 61NAB4 |
| Brand | Dixon |
| Model | RST40 |
| Brand | Timken |
| Model | QATP20A312SC |
| Brand | Baldor |
| Model | M3160 |
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.