We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 93893080 3/5VX800 Super HC Molded Notch PowerBand Belts - Cross Section: 5VX
- Strands: 3
- Sectional Top Width: 5/8"
- Total Top Width: 1 7/8"
- Depth: 35/64"
- Outside Circumference: 80.00"
- Material ID: 93893080
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 3/5VX800
Contact supplier for technical support on: 303-744-5800
$208.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
42
Belt Back Side
Smooth
Belt Inside
Notched
cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
depth
35/64 in
depth (per rib)
35/64 in
Effective Length (in)
79.82
Material
EPDM
Minimum Pulley Diameter
7.958 in
number ribs
3
Outside circumference (in)
80
outside length
80 in
Reinforced Material
Flex-Bonded Polyester
section
5VX
Series
9389
Sided
Single Sided
Static Conductive
No
Temperature Range
-60 to 250 deg F
Thickness (in)
0.55
top width
5/8 in
Top Width (in)
2
top width (per rib)
5/8 in
Type
Heavy Duty Molded Notch
| Category Name Description | The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. |
|---|---|
| Features Advantages | Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Meets ARPM / RMA IP-3-2 oil and heat resistant standards. Meets ARPM / RMA IP-3-3 static conductivity requirements. Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves. The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive. Patented Ethylene Material construction provides -60°F to +250°F temperature range to resist belt cracking. |
| Markets/Applications | Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive. |
| Outside Circumference (in) | 80.00 |
|---|---|
| Recommended Sheaves | Super HC Sheaves |
| Standard Pack | 1 |
|---|
| CASE/IH | F37748 |
|---|---|
| CATERPILLAR | 5L7423 |
| GSI/GRAIN SYSTEMS, INC | MHC00038 |
| GSI/GRAIN SYSTEMS, INC | MHC00604 |
| QUINCY | 128770-380 |
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read more
#2022026
Brand
Timken Belts
Model
R5VX800-3
#678489
Brand
Bando
Model
3-5VX800
#835232
Brand
TB Woods
Model
3R5VX800
#2282305
Brand
Browning
Model
3080140
#2243584
Brand
Bestorq
Model
3/5VX800
#1985929
Brand
Jason Industrial
Model
3/5VX800
#2335437
Brand
MasterDrive
Model
3/5VX800
| Brand | Hubbell Wiring |
| Model | NSOETM8 |
| Brand | Hubbell Wiring |
| Model | HBL8362RSA |
| Brand | Linn Gear |
| Model | SDSX1.000 |
| Brand | Smith Bearings |
| Model | CR-3-XBC |
| Brand | Cortina |
| Model | 07-800-3000 |
| Brand | Bestorq |
| Model | 3/A116 |
| Brand | Gates Rubber |
| Model | SDS 1.1/4 |
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.