We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 93894060 4/5VX600 Super HC Molded Notch PowerBand Belts - Cross Section: 5VX
- Strands: 4
- Sectional Top Width: 5/8"
- Total Top Width: 2 1/2"
- Depth: 35/64"
- Outside Circumference: 60.00"
- Material ID: 93894060
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 4/5VX600
Contact supplier for technical support on: 303-744-5800
$281.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
42
Belt Back Side
Smooth
Belt Inside
Notched
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
35/64 in
Depth (per rib)
35/64 in
Effective Length (in)
59.88
Material
EPDM
Minimum Pulley Diameter
7.958 in
Number ribs
4
Outside circumference (in)
60
outside length
60 in
Reinforced Material
Flex-Bonded Polyester
Section
5VX
Series
9389
Sided
Single Sided
Static Conductive
No
Temperature Range
-60 to 250 deg F
Thickness (in)
0.55
Top width
5/8 in
Top Width (in)
2.69
Top width (per rib)
5/8 in
Type
Heavy Duty Molded Notch
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51°C to +121°C (-60°F to +250°F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
#2021997
Brand
Timken Belts
Model
R5VX600-4
#678527
Brand
Bando
Model
4-5VX600
#2243601
Brand
Bestorq
Model
4/5VX600
#1986066
Brand
Jason Industrial
Model
4/5VX600
#835054
Brand
TB Woods
Model
4R5VX600
| Brand | Hubbell Wiring |
| Model | WS1001I |
| Brand | Omron |
| Model | CJ1W-NC213 |
| Brand | Dixon |
| Model | WA2 |
| Brand | Band-It |
| Model | BFES-A1230-024 |
| Brand | Gates Rubber |
| Model | AX88 |
| Brand | Hubbell Wiring |
| Model | CFB4GS1R8ADAPT |
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.