We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 90983105 3/BX105 Tri-Power PowerBand Belts - Strands: 3
- Cross Section: BX
- Sectional Top Width: 21/32"
- Total Top Width: 1 31/32"
- Depth: 13/32"
- Outside Circumference: 108.6"
- Material ID: 90983105
With a proprietary construction, Gates Tri-Power PowerBand belt has a superior combination of flex and load carrying capacity. This belt is engineered to transmit more horsepower than the classic cross sections in the same amount of drive space.
- Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-Bonded Cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- 15% capacity increase over wrapped belts.
MODEL 3/BX105
Contact supplier for technical support on: 303-744-5800
$174.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
38
Belt Back Side
Smooth
Belt Inside
Notched
Color
Black
Construction
Bandless
Cord Material
Polyester
Cross section
BX
Effective length (in)
107.949
Material
EPDM
Outside circumference (in)
108.92
Reinforced Material
Flex-Bonded Polyester
Section
BX
Series
9098
Sided
Single Sided
Static Conductive
Yes
Strand
3
Temperature Range
-60 to 250 deg F
Thickness
0.46
Top width (in)
2.15
Type
Heavy Duty Molded Notch
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration. 15% capacity increase over wrapped belts.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
Perfect Belts for Imperfect Conditions.
Over time, belts fail from heat cracks, stretching, or excessive wear. Belt re-tensioning and replacement leads to downtime, inefficiency, and loss of productivity. Our molded notch V-belts, including the Tri-Power belt line, offer a patented, new ethylene construction to keep your operations running when other belts fail.
Longer Life at Extreme Temperatures.
Ethylene rubber material (EPDM) resists hardening to avoid cracking with 88% broader temperature range compared to other belt materials, with a range from -51°C to +121°C (-60°F to +250°F). Gates Tri-Power PowerBand belts meet ARPM/RMA standards for oil and heat resistance as well as static conductivity.
#833891
Brand
TB Woods
Model
3RBX105
#2020257
Brand
Timken Belts
Model
RBX105-3
#2335575
Brand
MasterDrive
Model
3/BX105
| Brand | Bestorq |
| Model | 7/BX47 |
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.