
Image for Illustration purposes only. Actual product may vary
Telco Sensors SMPF7400-IO-TPT4 IO Fiber Sensor
MODEL SMPF7400-IO-TPT4
$255.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Connection
4 pin, M8 plug
Control Feature
Sensitivity pot. and light/dark switch
Current Consumption
30 mA
Features
IO-Link communication port
Function
Both
Housing
M18 x 1
Housing Material
Plastic
Housing Material, Front Lens
Polycarbonate
Housing Material, Sensor Housing
Polycarbonate
Hysteresis
Approx. 3 - 10 %
Light Immunity 15
40 000 lux
Light Source
Infrared (880 nm)
Max. Operation Frequency
250 Hz
Max. Output Load
200 mA / 30 V dc
Max. Residual Voltage
2 V
Opening Angle
+/- 4
Operation Mode
Fibre Sensor
Operation Temperature
-20 to +60 C
Output
NPN (IO-Link)
Output Indicator
Yellow LED
Output Status
N.C./N.O.
Power On Indicator
Green LED
Response Time ton / toff
2 ms / 2 ms
Reverse Polarity Protected
Yes
Sealing Class
IP 67
Sensing Range
Dependent of fibre optic
Shock
30 g
Short Circuit Protected
Yes
Storage Temperature
-40 to +80 C
Supply Voltage
10 - 30 V dc
Vibration
10 - 55 Hz, 0, 5 mm
Voltage Ripple
15 %
The 7000-IO series consists of a self-contained transmitter SMT, and a receiver SMR, which are to be used in thru-beam mode, an SMP for diffuse proximity, SMRR for retro reflective and an SMPF for use with fibre optic cables. The complete series is available with a 10-30 V dc supply voltage and with an NPN or PNP transistor output that can be connected as a push-pull configuration or as a supplementary output. The SM 7000-IO is equipped with an IO-link communication interface which allows a variety of process parameters and settings to be configured and monitored, which includes: sensitivity adjustment, teach-in function, automatic gain adjustment, output mode, on/off time delay, one-shot timer, hysteresis. Sensitivity adjustment and light or dark function may also be manually configured via integral potentiometers. The SMR is available with either a 0.5 ms response time and a 7 metre range or with a 2 ms response time and a 20 metre range. The test input in the SMT is intended to be used for disabling or enabling the transmitting power temporarily for test purpose or for multiplexing applications. The complete series is protected against reverse polarity of power supplies, control input and output signals. The output is protected against short circuit and inductive loads. All products include a 3-year worldwide warranty.
Brand | Flexco |
Model | 40047 |