Toshiba VT130G9U435K 350HP 460V 3Phase Nema-1 Frame 1 G9 Adjustable Speed Drive

Name: Toshiba VT130G9U435K 350HP 460V 3Phase Nema-1 Frame 1 G9 Adjustable Speed Drive
Brand: Toshiba
SKU: 2931428
Price: 33157.32 USD
Availability: InStock

MODEL VT130G9U435K

BRAND

Toshiba

SKU

2931428

WEIGHT

860.000 lb

UOM

each

Contact supplier for technical support on: 800-231-1412

$33,157.32 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $1

Typically Ships in: 1 day

Returnable: See conditions

Still Deciding?

Add this item to your saved items and easily come back later.

The G9 adjustable speed drive is the most advanced severe duty drive ever offered by Toshiba. It is a blend of a robust power platform and a state-of-the-art control scheme. With its 115% continuous overload rating and its dual 32-bit processor controls, the G9 provides the ability to operate the toughest of applications while still maintaining a high level of control.

G9 Specifications
Model Range	0.75 to 100HP	1 to 350 HP
Voltage Rating	200 to 240 V	380 to 480 V
Input Voltage Tolerance	±10%
Voltage Regulation	Main Circuit Voltage Feedback Control (Automatic Regulation, 'Fixed' and 'Control Off' Selections)
PWM Carrier Frequency	Adjustable 0.5 to 15 kHz (ASD Specific, Consult Factory)
Control System	Sine Wave PWM System - Flux field current vector control
V/f Pattern	Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost, 5-Point V/f Custom Curve Setting
Overload Current Rating	115% Continuous and 150% for two Minutes (< or =100 HP/480V), 110% Continuous and 150% for one Minute (>100 HP/480V)
Frequency Setting	Rotary Encoder Integrated into EOI, 0 to 10 V, ±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input
Frequency Precision	Analog Input 0.2% of the Maximum Output Frequency, Digital Input 0.01% of the Maximum Output Frequency
Output Frequency Range	0 to 299 Hz
Speed Regulation	Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range)
Discrete Input Terminals	Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional Hardware
Analog Inputs	One 4-20 mA or 0-10Vdc isolated input, one 0-10Vdc input, and one +/- 10Vdc input
Discrete Output Contacts	Three Output Contacts Programmable to 127 Functions
Analog Outputs	One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output
Control Board Communication Ports	2-Wire/4-Wire RS485
Power Terminals	Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); Dynamic Breaking Resistor (PA,PB); DC BUS (PA, PC)
Set Point Control (PID)	Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter, Feedback Settings Differential Gain
Retry	Can be setup to clear resetable faults upon trip automatically.
Restart	ASD will catch a coasting motor smoothly.
Ambient	Operating Temperature: -10 to +40°C; 14 to 104°F Humidity: 95% Non-Condensing
Installation	NEMA 1 Enclosure Type
Electronic Operation Interface (EOI)
LCD EOI (Liquid Crystal Display/Electronic Operator Interface)	Full English Back-Lit Display
LED EOI	Light Emitting Diode; Seven Segment Display
LED Indicators	Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red)
Keys	Local/Remote, ESC, Run, Mode, Stop/Reset
Rotary Encoder	Encoder with Integrated Enter Key for Frequency and Parameter Adjustments
Monitoring	Main Display shows two monitored Items selectable from: Output Current, DC Voltage, Output Voltage, Run Time, Comp. Frequency, PID Feedback, Motor Overload, Motor Load, ASD Load, Input Power, Output Power, RR Input, VI/II input, RX Input, RX2 Input, AM Output, and FM Output.
Selectable Display units	Completely Configurable along with Scaling Factor Multiple; Current Display Selectable Between Amps (A) or percentage of FLA (%); Voltage Display Selectable Between Volts or %.