Automation Surplus Page 35

#5693520

The Allen-Bradley 1485A-C2 is a 150 Ohm, 2 Watt terminating resistor designed for use with SLC 500 and PLC-5 communication networks, including Data Highway Plus (DH+) and Remote I/O. This component provides the necessary line termination to prevent signal reflections and ensure reliable data transmission in industrial control systems. It features a 1% tolerance for precise impedance matching and is a standard accessory for network configuration and troubleshooting.

Brand	Allen Bradley
Model	1485A-C2

$17.21 Each

Free shipping

#5694190

Allen-Bradley 1492-JDG3C is a Bulletin 1492 grounding terminal block with screw-type connections. This 3-pole block is rated for 20A, 600V, and features a green/yellow housing for protective earth (PE) identification. It is designed for DIN rail mounting to provide a reliable and secure grounding point for control circuits, ensuring proper safety and electrical continuity in industrial panels and enclosures.

Brand	Allen Bradley
Model	1492-JDG3C

$16.20 Each

Free shipping

#5694422

Allen-Bradley 872C-M22NP30-D4 is a cylindrical inductive proximity sensor from the Bulletin 872C family. This DC-powered sensor features a 30mm nominal sensing range, a 4-wire NPN normally open (NO) output, and a 4-pin M12 micro quick-disconnect connector. It is designed for non-contact detection of metallic objects in industrial automation applications, offering a compact M22 threaded barrel housing suitable for flush mounting.

Brand	Allen Bradley
Model	872C-M22NP30-D4

$257.52 Each

Free Shipping orders over $100

#5694753

Allen-Bradley 2098-DSD-010-DN is a digital servo drive from the Ultra 3000 series, designed for DeviceNet network connectivity. This drive provides 10A continuous output current and operates on 480V AC input power. It is engineered for precise motion control applications, offering high-performance servo control for industrial automation systems. The drive supports digital command and feedback interfaces for integration with Kinetix servo systems.

Brand	Allen Bradley
Model	2098-DSD-010-DN

Not available

#5695362

Allen-Bradley 2711P-K4M5D8 is a PanelView Plus 6 graphic terminal, part of the Bulletin 2711P operator interface family. This HMI features a 4.3-inch color touchscreen display with a resolution of 480 x 272 pixels, providing a compact operator interface for industrial control applications. It is designed for DIN rail or panel mounting and supports communication via Ethernet/IP and serial ports for integration with Allen-Bradley PLCs and other automation systems.

Brand	Allen Bradley
Model	2711P-K4M5D8

Not available

#5695529

The Allen-Bradley 931S-A3A2D-OP is a loop-powered, passive signal conditioner and converter designed for monitoring applications. This Bulletin 931S component provides signal isolation and conversion for process control and instrumentation systems, operating without an external power supply by utilizing the 4-20 mA loop current. It is suitable for DIN rail mounting in industrial control panels to interface between field sensors and PLC or DCS inputs.

Brand	Allen Bradley
Model	931S-A3A2D-OP

$395.57 Each

Free Shipping orders over $100

#5695564

Allen-Bradley MPL-A430H-SJ72AA is a Kinetix MPL series rotary servo motor designed for high-performance motion control. This 400V AC motor delivers a continuous torque of 3.0 Nm (4.23 lb-in) with a rated speed of 3000 RPM and a peak torque of 9.0 Nm. It features a 1.8 kW power rating, a 24-bit multi-turn absolute encoder with Hiperface DSL feedback, and an IP65-rated enclosure. The motor includes a 1.5-meter integral motor feedback cable for direct connection to compatible Kinetix drives.

Brand	Allen Bradley
Model	MPL-A430H-SJ72AA

Not available

#5695756

Allen-Bradley 5069-RTB6-SPRING is a 6-point removable terminal block (RTB) with spring-clamp termination for the Compact 5000 I/O platform. This Bulletin 5069 accessory provides a secure, tool-less wiring connection for 5069 discrete and specialty I/O modules, facilitating easy installation and maintenance. The terminal block is designed for DIN-rail mounting and is a standard component for building out CompactLogix 5380 control system field wiring.

Brand	Allen Bradley
Model	5069-RTB6-SPRING

$39.60 Each

Free shipping

#5695911

Allen-Bradley 889N-F4AFNU-6F is a 6-meter industrial cordset from the Bulletin 889N family, designed for sensor and device connectivity. It features a 4-pin M12 female connector on both ends, providing a secure, IP67-rated connection suitable for washdown and harsh environments. This cable is commonly used to extend sensor networks, connect I/O blocks, and interface with photoelectric sensors, proximity sensors, and other industrial automation devices requiring a reliable signal path.

Brand	Allen Bradley
Model	889N-F4AFNU-6F

$99.00 Each

Free shipping

#5697564

Allen-Bradley 1715-A3IO is a 3-slot base unit for mounting ArmorBlock 1732E distributed I/O modules onto a standard 35 mm DIN rail. This Bulletin 1715 base provides the mechanical interface and terminal connections for up to three I/O modules, facilitating easy installation and wiring in harsh industrial environments. It is designed for use with the ArmorBlock MaXum family of on-machine I/O.

Brand	Allen Bradley
Model	1715-A3IO

$427.35 Each

Free Shipping orders over $100

#5698096

Allen-Bradley 871TM-DH15NP30-D4 is a DC-powered inductive proximity switch from the Bulletin 871TM sensor family. This shielded, cylindrical sensor features a 15mm nominal sensing distance, NPN normally open (NO) solid-state output, and a 10-30V DC operating voltage range. It is designed for non-contact detection of metallic objects and includes a 4-pin M12 micro quick-disconnect (QD) connector for simplified wiring.

Brand	Allen Bradley
Model	871TM-DH15NP30-D4

$368.13 Each

Free Shipping orders over $100

#5699571

Allen-Bradley 847H-DN2A-AG00500 is an incremental encoder from the Bulletin 847H family, designed for precise position and speed feedback in industrial automation. This model features a 500 pulses per revolution (PPR) resolution, a 5-30V DC supply voltage, and a 100mA output current. It offers a line driver output for noise immunity and is housed in a rugged, IP65-rated enclosure suitable for demanding factory environments.

Brand	Allen Bradley
Model	847H-DN2A-AG00500

$1,104.00 Each

Free Shipping orders over $100

#5700597

Allen-Bradley 1492-CJT5-10 is a 10-pole center jumper for Bulletin 1492 screw-type terminal blocks. This connectivity accessory provides a convenient method for commoning or bridging multiple circuits on a DIN rail. It is designed for use with standard feed-through terminal blocks, facilitating efficient power distribution and signal wiring in industrial control panels. The jumper features screw terminals for secure wire connections.

Brand	Allen Bradley
Model	1492-CJT5-10

$21.60 Each

Free shipping

#5702268

Allen-Bradley 2097-R7 is a Kinetix shunt module for use with Bulletin 2097 servo drives. This accessory module is designed to manage regenerative energy from the servo system, providing a reliable solution for dynamic motion control applications. It integrates with the Kinetix drive architecture to enhance system performance and protect drive components.

Brand	Allen Bradley
Model	2097-R7

$189.00 Each

Free Shipping orders over $100

#5702475

Allen-Bradley 1492-J3-RE is a red, feed-through screw terminal block from the Bulletin 1492 connectivity product line. It is rated for 25A and 600V, with a wire range of 28-12 AWG (2.5 mm²). This DIN-rail mounted terminal block provides a reliable, color-coded connection point for control wiring in industrial panels and enclosures.

Brand	Allen Bradley
Model	1492-J3-RE

$2.88 Each

Free shipping

#5703323

The Allen-Bradley 1783-MX08T is an expansion module designed for the Stratix 2500 series of managed industrial Ethernet switches. This module adds eight 10/100 Mbps RJ45 ports with IEEE 802.3af Power over Ethernet (PoE) capability, providing up to 15.4W per port for connected devices such as IP cameras, VoIP phones, and wireless access points.

Brand	Allen Bradley
Model	1783-MX08T

$3,900.00 Each

Free Shipping orders over $100

#5703832

Allen-Bradley 1762-L24AWA is a MicroLogix 1200 programmable logic controller (PLC) from the Bulletin 1762 family. This compact controller features 24 I/O points (12 DC inputs and 12 relay outputs) and is powered by 24V DC. It includes a built-in RS-232 communication port for programming and connectivity, supporting the MicroLogix instruction set for discrete and analog control applications in small automation systems.

Brand	Allen Bradley
Model	1762-L24AWA

$5,003.50 Each

Free Shipping orders over $100

#5704689

Allen-Bradley MPL-A220T-EJ72AA is a Kinetix MPL series rotary servo motor rated for 2.2 kW continuous power and 3 Nm continuous torque, with a maximum speed of 3000 RPM. This 230V AC 3-phase motor features a high-resolution feedback device for precise motion control and is designed for integration with Allen-Bradley Kinetix servo drives for demanding industrial automation applications.

Brand	Allen Bradley
Model	MPL-A220T-EJ72AA

Not available

#5706446

Allen-Bradley 889R-R3AEA-5 is a 5-meter industrial cordset from the Bulletin 889R family, designed for sensor and device connectivity. It features a 5-pin M12 micro female connector on one end and a male connector on the other, providing a reliable interface for power and signal transmission in automation systems. This cordset is suitable for connecting sensors, actuators, and other field devices to controllers or junction boxes in demanding industrial environments.

Brand	Allen Bradley
Model	889R-R3AEA-5

$105.70 Each

Free Shipping orders over $100

#5706847

Allen-Bradley 1794-IE4XOE2 is a FlexLogix analog combination I/O module from the Bulletin 1794 FLEX I/O family. This module provides four analog inputs and two analog outputs, offering high-density signal conditioning for process control and monitoring applications. It is designed for DIN-rail mounting and interfaces with FlexLogix controllers for scalable distributed I/O solutions in industrial automation systems.

Brand	Allen Bradley
Model	1794-IE4XOE2

$1,680.00 Each

Free Shipping orders over $100

#5708806

Allen-Bradley 872C-A5N18-A5 is an inductive proximity switch from the Bulletin 872C sensor family. This cylindrical DC sensor features an 18mm nominal sensing range, a PNP normally open (N.O.) output, and a 4-pin M12 micro quick-disconnect connector. It is designed for non-contact detection of metallic objects in industrial automation applications, offering a compact form factor and reliable performance for position sensing and part detection.

Brand	Allen Bradley
Model	872C-A5N18-A5

$277.32 Each

Free Shipping orders over $100

#5709627

Allen-Bradley 2090-XXNFMF-S30 is a shielded feedback cable designed for connecting Kinetix servo drives to motors. This cable provides reliable signal transmission for critical motor feedback and is part of the Bulletin 2090 family of servo system cables. It features a 30-meter length and is constructed for industrial environments to ensure data integrity and system performance in motion control applications.

Brand	Allen Bradley
Model	2090-XXNFMF-S30

$1,249.99 Each

Free Shipping orders over $100

#5710679

The Allen-Bradley 1492-XIM2024-16RF is a 20-pin relay master digital interface module from the Bulletin 1492 connectivity family. This pre-wired module integrates 16 discrete relay outputs with integrated fusing, providing a compact and reliable solution for interfacing PLC digital outputs to field devices. It simplifies wiring, reduces panel space, and offers protection for control circuits in industrial automation applications.

Brand	Allen Bradley
Model	1492-XIM2024-16RF

$1,296.00 Each

Free Shipping orders over $100

#5711779

Allen-Bradley 194R-60-C3 is a Bulletin 194R terminal shield accessory for a 60A, 3-pole rotary disconnect switch. This stainless steel shield is designed for use with the 194R-C series NEMA 4/4X enclosed disconnect switch, providing touch-safe protection for line and load side terminals. It ensures proper isolation and meets safety spacing requirements when the switch is in the OFF position.

Brand	Allen Bradley
Model	194R-60-C3

$28.80 Each

Free shipping

#5712757

Allen-Bradley 1732D-IB16M12M12 is an ArmorBlock DeviceNet digital input module providing 16 discrete input points with M12 micro-connectors. This IP67-rated distributed I/O block is designed for on-machine installation, offering DeviceNet network connectivity for industrial automation systems. The module features a rugged, sealed housing suitable for harsh environments and simplifies wiring with pre-wired M12 connections.

Brand	Allen Bradley
Model	1732D-IB16M12M12

$756.00 Each

Free Shipping orders over $100

#5713409

Allen-Bradley 1794-IR8 is an 8-point RTD (Resistance Temperature Detector) input module for the FlexLogix distributed I/O system. This Bulletin 1794 module provides eight differential input channels for connecting 2-, 3-, or 4-wire RTDs, supporting various sensor types including Pt100, Ni120, and Cu10. It offers high-resolution temperature measurement for process monitoring and control applications, integrating seamlessly with Rockwell Automation Logix controllers over a backplane or network.

Brand	Allen Bradley
Model	1794-IR8

$3,764.60 Each

Free Shipping orders over $100

#5715292

Allen-Bradley 871TM-BH8N18-N3 is an inductive proximity switch from the Bulletin 871TM family. This DC-powered sensor features an 18mm nominal sensing range, a PNP normally open (N.O.) output, and a 4-pin M12 micro quick-disconnect connector. It is designed for non-contact detection of metallic objects in industrial automation applications, offering a compact and reliable sensing solution.

Brand	Allen Bradley
Model	871TM-BH8N18-N3

$284.15 Each

Free Shipping orders over $100

#5716679

Allen-Bradley 22-RF018-CL is a Bulletin 22 RF Series line filter designed for use with PowerFlex drives. This 3-phase filter is rated for 18A continuous current and 480V AC operation. It helps mitigate electromagnetic interference (EMI) and radio frequency interference (RFI) to ensure compliance with EMC standards and protect sensitive electronic equipment from electrical noise on the power line.

Brand	Allen Bradley
Model	22-RF018-CL

$396.00 Each

Free Shipping orders over $100

#5716711

Allen-Bradley 194E-A100-1756 is a Bulletin 194E rotary disconnect load switch rated for 100A at 600V AC. This 3-pole, non-fused switch provides a visible blade disconnect for motor circuit isolation and is housed in a NEMA 1 general-purpose indoor enclosure. It features a rotary operating mechanism with padlock provisions for lockout/tagout (LOTO) safety compliance and is suitable for use as a motor circuit disconnect or as a main disconnect in industrial control panels.

Brand	Allen Bradley
Model	194E-A100-1756

$648.00 Each

Free Shipping orders over $100

#5716879

Allen-Bradley 194E-E40-1753 is a Bulletin 194E load switch rated for 40A at 690V AC. This 3-pole, panel-mounted device provides motor circuit isolation and switching for loads up to 18.5kW. It features a rugged IP66 enclosure for protection against dust and water jets, suitable for industrial power distribution and motor control applications.

Brand	Allen Bradley
Model	194E-E40-1753

$120.00 Each

Free Shipping orders over $100

#5717669

Allen-Bradley 871TM-B8N18-H2 is an inductive proximity sensor from the Bulletin 871TM family. This 18mm diameter cylindrical sensor features an 8mm nominal sensing range, a DC PNP normally open (NO) output, and a 4-pin M12 micro quick-disconnect connector. It is designed for non-contact detection of metallic objects in industrial automation applications, offering a flush-mountable design and a robust housing suitable for factory environments.

Brand	Allen Bradley
Model	871TM-B8N18-H2

$410.05 Each

Free Shipping orders over $100

#5720634

Allen-Bradley 889D-F8ABDM-0M3 is a 0.3-meter (300mm) quick-disconnect (QD) cable for sensor and device connectivity. This Bulletin 889D cordset features an 8-pin M12 micro connector in a straight configuration, rated IP67/IP69K for washdown and harsh industrial environments. It is designed for use with Allen-Bradley photoelectric sensors, proximity sensors, safety devices, and other industrial controls requiring a reliable, sealed connection.

Brand	Allen Bradley
Model	889D-F8ABDM-0M3

$154.93 Each

Free Shipping orders over $100

#5720738

Allen-Bradley 2097-V34PR6-LM is a Kinetix 350 single-axis servo drive designed for EtherNet/IP network integration. This compact drive delivers 3A continuous (6A peak) output current and operates on 480V AC, three-phase input power. It features a single-phase 120/240V AC control power input, integrated Safe Torque-Off (STO) safety, and a built-in power supply for the controller. The drive supports MPL, MPM, and MPF series servo motors and is rated for IP20 environments.

Brand	Allen Bradley
Model	2097-V34PR6-LM

Not available

#5721620

Allen-Bradley VPL-B1652F-PK12AA is a Kinetix VPL series servo motor designed for high-performance motion control applications. This 400V AC servo motor provides precise positioning and speed control, integrating seamlessly with Allen-Bradley Kinetix servo drives and the Logix control platform. It is engineered for demanding industrial automation tasks requiring reliable torque and dynamic response.

Brand	Allen Bradley
Model	VPL-B1652F-PK12AA

$6,197.50 Each

Free Shipping orders over $100

#5721772

The Allen-Bradley 1756-L55 is a ControlLogix 5555 processor module designed for the 1756 chassis. This processor module, part of the Logix5555 series, provides the central logic and control for automation applications but does not include onboard user memory, requiring a separate memory module for program storage. It is a key component in the ControlLogix platform for scalable, high-performance control systems.

Brand	Allen Bradley
Model	1756-L55

$8,190.00 Each

Free Shipping orders over $100

#5723010

Allen-Bradley 871TM-B8N18-R3 is an inductive proximity switch from the Bulletin 871TM family. This DC PNP normally open (NO) sensor features an 8mm nominal sensing range, an 18mm diameter cylindrical housing, and a 4-pin M12 micro quick-disconnect connector. It is designed for non-contact detection of metallic objects in industrial automation applications, providing a solid-state output for reliable operation in control systems.

Brand	Allen Bradley
Model	871TM-B8N18-R3

$313.86 Each

Free Shipping orders over $100

#5724270

Allen-Bradley 1492-EAJ15 is a Bulletin 1492 feed-through terminal block with screw-clamp termination. Rated for 600V and 25A maximum current, it accepts 28-12 AWG wire (2.5 mm² cross-section). This grey, single-pole block features a compact design for high-density DIN rail mounting and is part of the Allen-Bradley connectivity system for industrial control panel wiring.

Brand	Allen Bradley
Model	1492-EAJ15

$5.71 Each

Free shipping

#5724944

Allen-Bradley 1495-N8 is a Bulletin 1495 auxiliary contact block designed for use with Bulletin 1495 motor starters and contactors. This block provides one normally open (1 N.O.) contact with screw-clamp terminals, rated for 10A thermal current at 600V maximum. It is used to add auxiliary signaling, interlocking, or control circuit functions to the main power contactor, facilitating integration into complex control systems.

Brand	Allen Bradley
Model	1495-N8

$166.72 Each

Free Shipping orders over $100

#5726653

Allen-Bradley 20BD034A0AYNAND0 is a Bulletin 20B PowerFlex 700 AC drive rated for 34A continuous output, 240V AC 3-phase input, and 10HP motor control. This variable frequency drive (VFD) features sensorless vector control, a built-in EMC filter, and an internal brake transistor for dynamic stopping. It is designed for demanding industrial applications requiring precise speed and torque regulation of AC induction motors.

Brand	Allen Bradley
Model	20BD034A0AYNAND0

$12,684.44 Each

#5726658

Allen-Bradley 194L-HE8A-175 is a Bulletin 194L rotary disconnect control and load switch rated for 175A. This heavy-duty switch provides reliable isolation and load switching for motor control and power distribution circuits. It features a rotary operating mechanism for positive on/off control and is designed for industrial panel and enclosure mounting.

Brand	Allen Bradley
Model	194L-HE8A-175

$45.60 Each

Free shipping

#5727134

Allen-Bradley 2098-DSD-HV150 is a High Voltage Drive from the ULTRA3000 digital servo drive family. This component is designed for precise motion control applications requiring high-voltage input. It interfaces with Kinetix servo systems for demanding industrial automation tasks, providing advanced servo control and integration within Rockwell Automation's architecture.

Brand	Allen Bradley
Model	2098-DSD-HV150

$5,117.50 Each

#5727154

Allen-Bradley 1585-C8HB-S600 is a 600-foot spool of Category 8.2 industrial Ethernet cable, part of the Bulletin 1585 connectivity line. This shielded, 4-pair cable features 26 AWG conductors and is designed for high-speed EtherNet/IP applications in demanding industrial environments. It provides robust data transmission for connecting industrial switches, drives, controllers, and other networked devices within a Connected Enterprise architecture.

Brand	Allen Bradley
Model	1585-C8HB-S600

$8,100.00 Each

Free Shipping orders over $100

#5729023

Allen-Bradley 1715-TASIF16 is a termination assembly designed for use with the 1715-IB16D 16-point 24V DC sinking input module. This assembly provides the necessary screw terminal connections for field wiring to the I/O module, facilitating easy installation and maintenance within a 1715 Redundant I/O system. It is a key component for building a distributed, fault-tolerant control architecture.

Brand	Allen Bradley
Model	1715-TASIF16

Not available

#5730696

Allen-Bradley 25A-B017N104 is a PowerFlex 523 AC variable frequency drive (VFD). This compact drive is rated for 1.7A continuous output, 240V 3-phase input, and 0.5HP motor control. It features sensorless vector control, an integrated EMC filter, and a removable keypad for programming and monitoring. The PowerFlex 523 is designed for simple, standalone applications requiring basic speed and torque control.

Brand	Allen Bradley
Model	25A-B017N104

$2,800.00 Each

#5730928

Allen-Bradley 900-TC8RGTH1Z25 is a DIN rail-mount temperature controller from the Bulletin 900 family. This 1/8 DIN and 1/4 DIN compatible unit features an 8A relay output for direct load switching and operates on a universal 100-240V AC/DC power supply. It provides precise temperature control for industrial heating and cooling processes with a configurable input for various thermocouple and RTD sensor types.

Brand	Allen Bradley
Model	900-TC8RGTH1Z25

Not available

#5731054

Allen-Bradley 150-C43NCR is a Bulletin 150 SMC-3 Smart Motor Controller soft starter, rated for 43A at 200-600V AC, 3-phase operation. This solid-state controller provides smooth, controlled acceleration and deceleration for AC induction motors, reducing mechanical stress and inrush current. It features integrated bypass contacts, advanced motor protection, and communication options for integration into motor control systems.

Brand	Allen Bradley
Model	150-C43NCR

Not available

#5731963

Allen-Bradley 1492-FPK2120 is a fuse plug accessory for Bulletin 1492-P push-in terminal blocks. It features a built-in LED blown fuse indicator for 60-150V AC/DC circuits and accepts standard 5x20mm fuses. This plug-in component is designed for use with isolation and plug-in terminal blocks, providing visual fault indication to simplify maintenance and troubleshooting in control panel and DIN-rail mounted systems.

Brand	Allen Bradley
Model	1492-FPK2120

$21.60 Each

Free shipping

#5731995

Allen-Bradley 871A-TS3-P is a 3-pin straight female PICO terminal chamber connector, part of the Bulletin 871A sensor accessory line. This component provides a secure, in-line connection point for sensor cordsets, facilitating wiring and maintenance. It is designed for use with PICO-style (M8) connectors commonly found on Allen-Bradley photoelectric and proximity sensors. The straight configuration offers a compact connection solution for tight spaces in industrial control panels and machinery.

Brand	Allen Bradley
Model	871A-TS3-P

$82.71 Each

Free shipping

#5733382

Allen-Bradley 1756-L63S is a GuardLogix 5570 Series safety controller from Rockwell Automation. This integrated safety and standard control system combines a Logix 5573 processor with SIL 3/PLe safety functionality. It features 2 MB of user memory, supports up to 2 safety tasks, and provides 2 CIP Safety connections for networked safety devices. The controller is designed for high-performance safety applications requiring both standard and safety control within a single platform.

Brand	Allen Bradley
Model	1756-L63S

$22,330.00 Each

Free Shipping orders over $100

#5735563

Allen-Bradley 1715-A2A is a base unit for the Bulletin 1715 ArmorPoint On-Machine I/O system. This component provides the mounting and connection interface for ArmorPoint I/O modules, designed for direct installation in harsh industrial environments. It supports the distributed I/O architecture for machine-level control connectivity.

Brand	Allen Bradley
Model	1715-A2A

$1,146.60 Each

Free Shipping orders over $100

#5735975

Allen-Bradley 872C-N8BN12-D4 is a cylindrical inductive proximity sensor from the Bulletin 872C family. This DC-powered sensor features an 8mm nominal sensing range, a 4-pin M12 quick-disconnect connector, and a normally open (NO) NPN output configuration. It is designed for non-contact detection of metallic objects in industrial automation applications, offering a compact form factor suitable for high-density mounting.

Brand	Allen Bradley
Model	872C-N8BN12-D4

$155.58 Each

Free Shipping orders over $100

#5736140

Allen-Bradley 194R-R1 is an operating shaft accessory for Bulletin 194R rotary disconnect switches. This component is designed for side operation of non-fused disconnect switches, enabling remote or extended handle mounting. It is constructed for industrial environments and is compatible with 194R switch bodies rated up to 1250 A IEC and 1200 A UL. The shaft facilitates safe isolation and lock-out tag-out functionality in motor control and power distribution applications.

Brand	Allen Bradley
Model	194R-R1

$198.00 Each

Free Shipping orders over $100

#5736821

Allen-Bradley 1732DS-IB8 is a DeviceNet Safety ArmorBlock input module providing 8 discrete safety input channels for connecting devices like emergency stops, safety gates, and interlock switches. This IP67-rated, on-machine I/O module integrates safety and standard control onto a single DeviceNet network, supporting safety category 4 (Cat. 4) and SIL 3 applications. It features a rugged, sealed housing for harsh industrial environments and simplifies wiring with plug-in connectors.

Brand	Allen Bradley
Model	1732DS-IB8

$1,800.00 Each

Free Shipping orders over $100

#5737624

Allen-Bradley 1585D-M4TBDM-2 is a 2-meter industrial cordset with a straight M12 4-pin male connector and a straight M12 4-pin female connector. This IP67-rated cable assembly is designed for reliable signal and power connectivity in harsh environments, commonly used with sensors, actuators, and industrial network devices. It provides a secure, sealed connection for Allen-Bradley and other compatible industrial equipment.

Brand	Allen Bradley
Model	1585D-M4TBDM-2

$117.00 Each

Free Shipping orders over $100

#5737814

Allen-Bradley 2092-DA3 is a Digital Servo Drive from the Ultra 1500 series. This drive is part of the Kinetix servo drive family, designed for precise motion control applications. It interfaces with servo motors to provide high-performance positioning and velocity control in industrial automation systems.

Brand	Allen Bradley
Model	2092-DA3

$3,700.00 Each

Free Shipping orders over $100

#5737941

Allen-Bradley 1585D-M4HBDM-5 Ethernet patchcord for industrial network connectivity. 5-meter cable with M12 connector to RJ45 termination. Bulletin 1585D series designed for EtherNet/IP and industrial automation applications. Ruggedized construction for factory floor environments. Compatible with Stratix switches, ControlLogix processors, and CompactLogix systems requiring reliable network communication.

Brand	Allen Bradley
Model	1585D-M4HBDM-5

$180.00 Each

Free Shipping orders over $100

#5773247

TURCK BI5-Q08-AP6X2-V1131 Proximity Switch

Brand	Turck
Model	BI5-Q08-AP6X2-V1131

$165.00 Each

Free Shipping orders over $100

#5773677

TURCK BL67-GW-DN DeviceNet Interface

Brand	Turck
Model	BL67-GW-DN

$638.00 Each

Free Shipping orders over $100

#6374695

Modicon BMEP584040 Processor module Modicon M580 Level 4 Remote

Brand	Modicon
Model	BMEP584040

$11,662.31 Each

Free Shipping orders over $100

#6374768

Modicon BMXXBE2005 Modicon M340 automation platform X80 Backplane Extender Kit

Brand	Modicon
Model	BMXXBE2005

$1,077.06 Each

Free Shipping orders over $100