Image for Illustration purposes only. Actual product may vary

MRC 206MG max-type ball bearing with 30mm bore, 2.441" OD, and metal cage. Open enclosure with snap ring groove. Radial design for high radial load capacity. Drop-in replacement for industrial applications.

Name: MRC 206MG max-type ball bearing with 30mm bore, 2.441" OD, and metal cage. Open enclosure with snap ring groove. Radial design for high radial load ca
Brand: MRC Bearing
Price: 40.39 USD
Availability: InStock
Rating: 5.0 (2 reviews)

MODEL 206MG

BRAND

MRC Bearing

SKU

1132098

WEIGHT

0.512 lb

UOM

each

Contact supplier for technical support on: 888 753 3477

$40.39 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Bearing Modification Services

Typically Ships in: 1 day

Returnable: See conditions

Bearing Type

Radial

Cage

Metal

Enclosure

Open

I.D.

1.181

Locking

None

O.D.

2.441

Item Details

Manufacturer:	MRC Bearing Service
Weight:	0. 512 lbs.
Product Name:	200-M Light Series Ball Bearing
Description:	30 mm ID x 62 mm OD x 16 mm Wide; Open; With Snap Ring; Single Row Radial Steel Bearing

Specifications

Inch/Metric	Metric Bore
Bore Type	Round Bore
I. D.	30 mm
O. D. [Min]
O. D. [Max]
O. D.	62 mm
Width [Min]
Width [Max]
Width	16 mm
Enclosure	Open
Rows of Balls	Single
Material	Steel
O. D. Type	Straight w/ Snap Ring
Bearing Type	Radial
Precision	Standard
Radial Internal Clearance Specification	Normal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball Material	Steel
Cage Type	Metal
Capacity	Maximum Capacity
Contact Angle	0°
Guide Type
Lubrication
Outer Ring Width	16 mm
Precision Level	Standard (ABEC 1)
Preload Level	None
Seal Material	None
Seal Type	Unsealed
Seal Width
Dynamic Load Rating	5150 lbf
Static Load Rating [Max]	3820 lbf
Ball Dia.
Bearing Design
Bore B
Cage Material	Steel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius	1 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width	16 mm
Internal Design
Limiting Speed
Limiting Speed - Grease	9000 rpm
Limiting Speed - Oil	11000 rpm
Limiting Speed - Sealed
Locking Device	No Locking Device
Lube Hole Center
Lubricant	Oil Preservative
Misalignment Range
No. in Set	Single Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant	None
Preload Amount
Radial Internal Clearance	Normal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap Ring	With Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]
Temperature Range [Max]	450 °F
Use With

Product Information

Caution	Not to be used where only thrust loads are present
Applications	Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
Features	Maximum radial load-carrying capacity Ability to carry heavy combined radial and thrust loads Designated as the notched type because it has a filling notch on one side of the inner and outer rings Normally furnished with ABMA CO radial clearance Type and material available is a two-piece, pressed steel, ball riding, stayrod cage Single-row maximum capacity filling-notch bearings

Drawing

SKU: 1133538

Motor bearings

Of all the bearings I have purchased in the last 45 years, these look to be top quality.

SKU: 1133536

Great bearings, great price!

I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was available, had to use contact link to make sure they were available to ship. Would be very nice if real-time in-stock status could be available while hunting down need parts, but in the long run it's not that big of deal. The stock status email back following the inquire was quick with a quoted price and purchase link.

How do I choose the right type of bearing for my application?

Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.

What is the difference between deep groove and angular contact ball bearings?

Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.

When will I be charged for my order?

Do you provide credit terms?

Can I get a discounted price? I am a reseller / government entity.

What is the return/warranty policy?

Can it be shipped today?

Does “Usually ships in 24 hours” mean it’s in stock?

Read full FAQ

Alternatives Products from another supplier. Note, it may not be identical in style or function to original item