We never sell your data to third parties
MRC CBF012SS pillow block bearing is a washdown-duty mounted unit with a setscrew locking collar. This ball bearing is designed for industrial applications requiring corrosion resistance and easy installation.
MODEL CBF012SS
Contact supplier for technical support on: 888 753 3477
$154.81 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Type
Ball Bearing
Locking
Setscrew Locking Collar
Item Details
| Manufacturer: | MRC Bearing Service |
|---|---|
| 0. 592 lbs. | |
| Product Name: | Marathon Series 3-Bolt Flange Bracket |
| Description: | 3-Bolt Flange Bracket for 3/4" Shaft; Corrosion Resistant-Duty; Composite Housing; Setscrew Locking Collar; Non-Relubricatable; Contact Seals; Stainless Steel Insert |
Specifications
| Inch/Metric | Inch |
|---|---|
| Shaft Dia. [Min] | |
| Shaft Dia. [Max] | |
| Shaft Dia. | 3/4 in |
| Mounted Unit Duty | Corrosion Resistant-Duty |
| Locking Device | Setscrew Locking Collar |
| Housing Length | 4 11/32 in |
| Housing Material | Composite |
| Long Bolt Hole Spacing | 1 1/2 in |
| Short Bolt Hole Spacing | 7/8 in |
| Bearing Type | Ball Bearing |
| Bracket Length | 2 9/16 in |
| Center Line to Base Dimension [Min] | |
| Center Line to Base Dimension [Max] | |
| Center Line to Base Dimension | N/A |
| Center Line to Bolt Holes | 1 11/16 in |
| End Type | Open End |
| Flange Thickness | 7/16 in |
| Housing Height | 2 9/16 in |
| Housing Width | 15/16 in |
| Length Through Bore | 1. 22 in |
| Lubrication | Non-Relubricatable |
| Overall Width | 1 5/16 in |
| Seal Type | Contact Seals |
| Series | |
| Bearing Design | |
| Bearing Insert | RRH1012BRR |
| Bolt Circle Dia. | |
| Bolt Hole Size | 13/32 in |
| Bolt Hole Spacing | |
| Bolt Size | 3/8 in |
| Center of Bearing to Back of Inner Ring | |
| Center of Bearing to Front of Inner Ring | |
| Collar Extension | |
| Collar O. D. | |
| Color | |
| Dynamic Load Rating | 2380 lbf |
| Housing No. | |
| Insert Type | Stainless Steel Insert |
| Misalignment Range | |
| Special Features | |
| Static Load Rating [Max] | 1470 lbf |
| Temperature Range [Min] | |
| Temperature Range [Max] |
SKU: 1133538
Motor bearings
Of all the bearings I have purchased in the last 45 years, these look to be top quality.
Read moreSKU: 1133536
Great bearings, great price!
I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was available, had to use contact link to make sure they were available to ship. Would be very nice if real-time in-stock status could be available while hunting down need parts, but in the long run it's not that big of deal. The stock status email back following the inquire was quick with a quoted price and purchase link.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | MCR Safety |
| Model | 9389S |
| Brand | Hydraulic Technologies |
| Model | 3-1379 |
| Brand | Fasco |
| Model | C4RS70 |
SKU: 1133538
Motor bearings
Of all the bearings I have purchased in the last 45 years, these look to be top quality.
Read moreSKU: 1133536
Great bearings, great price!
I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was available, had to use contact link to make sure they were available to ship. Would be very nice if real-time in-stock status could be available while hunting down need parts, but in the long run it's not that big of deal. The stock status email back following the inquire was quick with a quoted price and purchase link.
Read more