We never sell your data to third parties
Dodge 124261 F4B-SC-211 4-bolt flange mounted ball bearing with 2-11/16" bore, set screw locking, cast iron housing, standard duty rating, DualGuard seals with flingers, non-expansion design for fixed shaft positioning in general purpose industrial applications.
MODEL F4B-SC-211
Contact supplier for technical support on: +1-864-284-5700
$302.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
214 series
Bearing Series
214 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.8800 in, 149.352 mm
Bore
2 11/16 in
Bore Diameter
2-11/16 inches
Bore length
2.5400 in, 64.516 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
Housing Type
Four-bolt flange mount
I.D.
44415 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
3000 rpm
Max Speed
2000 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seals
DualGuard single lip seal
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
2.6875 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
Specifications
- Catalog Number: 124261
- Engineering Number: F4B-SC-211
- Housing Type: 4-Bolt Flange
- Bore Size: 2-11/16" (68.263mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 13.2000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2218339
Brand
Dodge
Model
INS-ER-SC-203
#5010895
Brand
Dodge
Model
M4H26T28TSC3036CP
#123324
Brand
Dodge
Model
F4B-SC-111
#2076329
Brand
Dodge
Model
142610
#2076331
Brand
Dodge
Model
142612
#2255760
Brand
SealMaster
Model
SF-43
#125590
Brand
Dodge
Model
F4B-DL-211
#326938
Brand
SKF Bearing
Model
FY 2.11/16 TF
#269730
Brand
NTN Bearing
Model
UCFU-2.11/16
#5704
Brand
AMI Bearings
Model
UCF214-43
#2255105
Brand
SealMaster
Model
SF-43C
#492321
Brand
Link-Belt
Model
10410561
| Brand | Dormer Pramet |
| Model | A90110.0 |
| Brand | LS Electric |
| Model | 1379001200 |
| Brand | U.S.Tsubaki |
| Model | C2030VRPR3L |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/