We never sell your data to third parties
Dodge 123813 P2B-SC-107 two-bolt pillow block bearing with 1-7/16" bore (36.512mm), 65-degree set screw locking, standard duty cast iron housing, DualGuard seals with flingers, 207 series insert, 3461 lbf static load capacity. 1-7/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-107
Contact supplier for technical support on: +1-864-284-5700
$113.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
207 series
Base to center height
1.8800 in, 47.752 mm
Bearing Series
207 series standard duty ball bearing insert
Bearing type
Ball, ball
Bolt centerline range
4 11/16 inch-5 7/16 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 7/16 in
Bore Diameter
1-7/16" with 65-degree set screw locking
Bore length
1.7100 in, 43.434 mm
Configuration
Non-expansion (fixed)
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
1 7/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Max Speed
3500 RPM
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard single lip seal
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
1 7/8 inch
Shaft diameter
1.4375 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 1-7/16" (36.512mm) with 65-degree set screw locking
- Bearing Series: 207 series standard duty ball bearing insert
- Sealing: DualGuard single lip seal with rubberized flinger protection
- Load Capacity: 3461 lbf static load rating
- Configuration: Non-expansion (fixed) design for shaft positioning
- Applications: General industrial machinery, conveyor systems, and standard duty applications requiring reliable shaft support
SKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#792191
Brand
Dodge
Model
128354
#127074
Brand
Dodge
Model
P2B-SCEZ-107-P
#123379
Brand
Dodge
Model
P2B-SC-107
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#130436
Brand
Dodge
Model
P2B-VSC-107
#421873
Brand
SealMaster
Model
700188
#498187
Brand
Link-Belt
Model
10411041
#2271876
Brand
Browning
Model
767755
#326692
Brand
SKF Bearing
Model
SY 1.7/16 RM
#2272220
Brand
Browning
Model
765811
#131750
Brand
Dodge
Model
P2B-SCAH-107
#2272219
Brand
Browning
Model
767477
SKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/