We never sell your data to third parties
Dodge 052532 P2B-SCB-115-HT two-bolt pillow block bearing with 1-15/16" bore, set screw locking, cast iron housing, high temperature rated to 400°F, DualGuard seals, 210 series, standard duty for general industrial applications. 1-15/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCB-115-HT
Contact supplier for technical support on: +1-864-284-5700
$359.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
210 series
Base to center height
2.1900 in, 55.626 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
1 15/16 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
Yes
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Shield
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.9375 in
Standoff housing
No
Suitable for high temperature
Yes
Suitable for washdown
No
Take-up frame size
LD-30, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block
- Bore Size: 1-15/16" (49.212mm)
- Locking Type: Set screw (65° angle)
- Housing Material: Cast iron
- Duty Rating: Standard duty
- Temperature Rating: High temperature to 400°F (204°C)
- Bearing Series: 210 series
- Sealing: DualGuard seals with flingers
- Expansion Type: Non-expansion (fixed)
- Applications: General industrial equipment requiring high temperature operation
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5903695
Brand
Dodge
Model
P2B-SCMAH-111-HT-DRY
#123424
Brand
Dodge
Model
P2B-SCB-115-HT
#792177
Brand
Dodge
Model
128358
#2217871
Brand
Dodge
Model
P2B-SCM-112-HTS
#2217983
Brand
Dodge
Model
P2B-SXRED-200S
| Brand | Edwards |
| Model | 10203512 |
| Brand | SolaHD |
| Model | 23-23-210-8 |
| Brand | SolaHD |
| Model | SCP30T515-DN |
| Brand | Cleveland |
| Model | C00944 |
| Brand | Dormer Pramet |
| Model | 5978505 |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/