We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 057798 P2B-SCAH-012-HT two-bolt pillow block bearing with 3/4 inch bore. Cast iron housing, set screw locking, standard duty ball bearing insert. High temperature rated to 400°F. Non-expansion (fixed) design with single-lip seal. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Air Handling applications
MODEL P2B-SCAH-012-HT
Contact supplier for technical support on: +1-864-284-5700
$178.11 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Air handling
Ball bearing series
204 series
Base to center height
1.3100 in, 33.274 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1900 in, 106.426 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore length
1.2300 in, 31.242 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
Yes
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
0.7500 in
Standoff housing
No
Suitable for high temperature
Yes
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block (P2B)
- Bore Diameter: 3/4 inch (19.05mm)
- Locking Type: 65° set screw for maximum holding power
- Housing Material: Cast iron construction
- Temperature Rating: High temperature to 400°F (204°C)
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 204 series ball bearing
- Expansion Type: Non-expansion (fixed) - locates shaft position
- Seal Type: Single-lip seal with flingers
- Weight: 1.38 lbs
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#792184
Brand
Dodge
Model
128350
#125539
Brand
Dodge
Model
P2B-DL-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
| Brand | Nexen |
| Model | 967268 |
| Brand | Bridgeport |
| Model | LB-39 |
| Brand | Eklind |
| Model | 64840 |
| Brand | Thomson Linear |
| Model | XCT2-1008 |
| Brand | Airmaster |
| Model | 23007 |
| Brand | Orbit Industries |
| Model | MBBH-16 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/