We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 126820 P2B-SCM-211 two-bolt pillow block bearing with 2-11/16" (68.263mm) bore. Cast iron housing with medium duty set screw locking mechanism. Features DualGuard seals with flingers for reliable industrial service. 215 series ball bearing. 2-11/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-211
Contact supplier for technical support on: +1-864-284-5700
$373.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
215 series
Base to center height
3.5000 in, 88.9 mm
Bearing type
Ball, ball
Bolt centerline range
8 1/2 inch - 9 1/2 inch
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
2 11/16 in
Bore length
2.3300 in, 59.182 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 11/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
3000 rpm
Max Speed
1750 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
3 1/2 inch
Shaft diameter
2.6875 in
Standoff housing
No
Static load capacity
11108 lbf, 49410.846 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-350
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block (P2B)
- Bore Diameter: 2-11/16 inch (68.263mm)
- Locking Type: 65° set screw for maximum holding power
- Duty Rating: Medium duty (SCM) for heavier loads
- Housing Material: Cast iron construction
- Bearing Series: 215 series ball bearing
- Seal Type: DualGuard single lip seals with rubberized flingers
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Rolling Element: Medium duty ball bearings
- Applications: Suitable for industrial applications requiring higher load capacity than normal duty bearings
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#581945
Brand
Dodge
Model
142110
#123693
Brand
Dodge
Model
P2B-SCM-211
#792254
Brand
Dodge
Model
TS-350X9-TUFR
#2247197
Brand
Dodge
Model
127331
#123324
Brand
Dodge
Model
F4B-SC-111
#422300
Brand
SealMaster
Model
MPD-43 CXU
#2255303
Brand
SealMaster
Model
702311
#123628
Brand
Dodge
Model
P2B-SCMAH-211
#218324
Brand
IPTCI Bearing
Model
UCPX 14 43
#2255305
Brand
SealMaster
Model
MPD-43C CXU
#3348
Brand
AMI Bearings
Model
UCPX14-43
#269411
Brand
NTN Bearing
Model
UCPX-2.11/16
| Brand | Cle-Line |
| Model | C25077 |
| Brand | Magnetics |
| Model | PH2102 |
| Brand | AttaBox |
| Model | PM6-8 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/