We never sell your data to third parties
Dodge 126534 P2B-SCM-215-NL two-bolt pillow block ball bearing with 2-15/16" bore. Cast iron housing, set screw locking, medium duty rating. 216 series with DualGuard seals, pre-greased no-lube design. Non-expansion. 2-15/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-215-NL
Contact supplier for technical support on: +1-864-284-5700
$455.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
216 series
Base to center height
3.5000 in, 88.9 mm
Bearing type
Ball, ball
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
2 15/16 in
Bore length
2.3800 in, 60.452 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Cast iron
Max RPM
2500 RPM
Max Speed
1000 RPM
Relubrication
No
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.9375 in
Standoff housing
No
Static load capacity
13102 lbf, 58280.6 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-400
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block
- Bore Diameter: 2-15/16 inch (74.612mm)
- Locking Type: 65-degree set screw
- Duty Rating: Medium duty
- Housing Material: Cast iron
- Series: 216 series
- Sealing: DualGuard seals with flingers
- Lubrication: No-Lube sealed for life
- Expansion Type: Non-expansion (fixed)
- Rolling Element: Medium duty ball bearings
- Max Speed: 1000 RPM
- Applications: Medium-load applications requiring sealed-for-life maintenance-free operation
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2491642
Brand
Moline Bearing
Model
UCPX15-47
| Brand | Remke |
| Model | RSR-9508-3-E |
| Brand | Remke |
| Model | 104D0060AP |
| Brand | Orbit Industries |
| Model | FA-4SDB-MKO |
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/