We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128700 P2B-DL-012 two-bolt pillow block bearing with 3/4" bore, D-Lok concentric clamp collar locking, cast iron housing, standard duty ball bearing insert, DualGuard seal, non-expansion fixed design, 204 series. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DL-012
Contact supplier for technical support on: +1-864-284-5700
$97.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
204 series
Base to center height
1.3100 in, 33.274 mm
Bearing type
Ball, ball
Bolt centerline range
3 3/8 inch-4 1/8 inch
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1900 in, 106.426 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore length
1.2800 in, 32.512 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
3/4 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
7500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
1 5/16 inch
Shaft diameter
0.7500 in
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 3/4" (19.05mm) with 204 series bearing
- Locking Mechanism: D-Lok concentric clamp collar - single Allen wrench tightening
- Bearing Type: Standard duty ball bearing insert
- Seal Protection: DualGuard seals with flingers
- Configuration: Non-expansion (fixed) design
- Maximum Speed: 7,500 RPM
- Applications: General purpose mounting where shaft concentricity and no-marring installation is required
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read more
#125539
Brand
Dodge
Model
P2B-DL-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#792184
Brand
Dodge
Model
128350
#2254968
Brand
SealMaster
Model
NP-12T
| Brand | NoTrax |
| Model | 105S0023CH |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/