We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128828 P2B-DLM-112 two-bolt pillow block bearing with 1-3/4" bore, medium duty D-Lok concentric clamp collar locking, cast iron housing, 210 series ball bearing insert, DualGuard seals, non-expansion fixed configuration. 1-3/4" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLM-112
Contact supplier for technical support on: +1-864-284-5700
$194.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
210 series
Base to center height
2.3100 in, 58.674 mm
Bearing type
Ball, ball
Bolt centerline range
6 inch - 6.68 inch
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
1 3/4 in
Bore length
2.0100 in, 51.054 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 3/4 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
4500 rpm
Max Speed
4500 rpm
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
2.31 inch
Shaft diameter
1.7500 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-30, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1-3/4" (44.45mm) shaft compatibility
- Locking Mechanism: D-Lok concentric clamp collar - single Allen wrench tightening, no shaft marring
- Duty Rating: Medium duty for enhanced load capacity
- Bearing Series: 210 series ball bearing insert
- Configuration: Non-expansion (fixed) for primary shaft location
- Sealing: DualGuard single lip seal with rubberized flinger protection
- Applications: Medium-duty industrial equipment requiring precise shaft concentricity and easy installation without shaft damage
#125669
Brand
Dodge
Model
P2B-DLM-112
#123424
Brand
Dodge
Model
P2B-SCB-115-HT
#128803
Brand
Dodge
Model
P2B-VSC-50M
#2217983
Brand
Dodge
Model
P2B-SXRED-200S
#122535
Brand
Dodge
Model
LD-30X24-TUFR
#125681
Brand
Dodge
Model
P2B-DLMAH-112
#421391
Brand
SealMaster
Model
705654
#1387919
Brand
AMI Bearings
Model
UEPX09-28
#8205
Brand
AMI Bearings
Model
UEAKH209-28
| Brand | Browning |
| Model | 1094457 |
| Brand | Chicago-Latrobe |
| Model | 46149 |
| Brand | Timken |
| Model | 493524 |
| Brand | Dodge |
| Model | 071414 |
| Brand | Dodge |
| Model | 023367 |
| Brand | Dodge |
| Model | 069572 |
| Brand | Timken |
| Model | TCJ2 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/