We never sell your data to third parties
Dodge 128698 P2B-DLM-307 two-bolt pillow block bearing with 3-7/16" bore, D-Lok concentric clamp collar locking, medium duty cast iron housing, DualGuard seals, 218 series for heavy-duty industrial applications. 3-7/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLM-307
Contact supplier for technical support on: +1-864-284-5700
$916.81 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
218 Series
Base to center height
4.0000 in, 101.6 mm
Bearing Series
218 Series
Bearing type
Ball, ball
Bolt centerline range
10.32 inch-11.62 inch
Bolt Diameter
0.8750 in
Bolt to bolt max
11.6200 in, 295.148 mm
Bolt to bolt min
10.3200 in, 262.128 mm
Bore
3 7/16 in
Bore Diameter
3-7/16"
Bore length
2.7200 in, 69.088 mm
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
3 7/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max Speed
2000 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
4 in
Shaft diameter
3.4375 in
Standoff housing
No
Static load capacity
16641 lbf, 74022.856 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, non-expansion (fixed)
- Bore Diameter: 3-7/16" (87.312mm)
- Locking Type: D-Lok concentric clamp collar - single Allen wrench tightening
- Housing Material: Cast iron
- Duty Rating: Medium duty for heavier loads
- Bearing Series: 218 Series
- Sealing: DualGuard seals with flingers
- Max Speed: 2000 RPM
- Applications: Industrial machinery requiring concentricity and no shaft marring
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5003639
Brand
Dodge
Model
P2B-SCM-211-NL-LLS
#2247201
Brand
Dodge
Model
127335
#791389
Brand
Dodge
Model
P2B-SCMED-85M
#2217690
Brand
Dodge
Model
P2B-DLM-211-NLS
#123693
Brand
Dodge
Model
P2B-SCM-211
| Brand | Remke |
| Model | 105P0010M51 |
| Brand | Hubbell Wiring |
| Model | 02201009 |
| Brand | Drillco |
| Model | 425A224 |
| Brand | Drillco |
| Model | 300C128 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/