We never sell your data to third parties
Dodge 042570 SP4B532-SAFS-507TT four-bolt pillow block mounted spherical roller bearing with 5.4375" bore, tapered adapter shaft attachment, split cast iron housing, non-expansion fixed design, and grease lubrication for heavy-duty industrial applications.
MODEL 042570
Contact supplier for technical support on: +1-864-284-5700
$7,797.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to center height
6.6900 in, 169.926 mm
Bearing component
Mounted Bearing
Bearing type
Spherical roller, spherical roller
Bolt Diameter
1.0000 in
Bolt to bolt max
19.1300 in, 485.902 mm
Bolt to bolt min
17.3800 in, 441.452 mm
Bolt width
3.7500 in, 95.25 mm
Bore length
9.2200 in, 234.188 mm
Expansion capability
Non-expansion (fixed)
Greasable
Yes
Housing construction
Split
Housing type
Four-bolt pillow block
Insert material
Steel
Lubrication type
Grease
Max Speed
1500 RPM
Shaft attachment
Tapered adapter
Shaft diameter
5.4375 in
Static load capacity
315000 lbf, 1401189.809 N
Features/Benefits
DODGE SAFS cast steel pillow blocks mount 22200K series spherical roller bearings on 2-7/16" - 8" shafts.
These pillow blocks are well suited for applications requiring either grease or oil lubrication where adapter mounting is preferred and limited thrust loads are experienced. Cast steel housings provide greater resistance to impact and shock loading than the more economical cast iron pillow blocks.
SAFS pillow blocks are furnished complete with the TRIPLE-TECT combination labyrinth and face rubbing seals. LER triple ring seals are available as an alternate seal for SAFS pillow blocks. Where required, purgeable auxiliary seals and end closures are also available.
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 117869
Awesome transaction
Great company to do business with. Transaction went smooth and quick!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Face Runout/OD is the variation of the outside surface generatrix inclination with the face. This tolerance is meant to help ensure the outer ring of the bearing is close enough to a right angle with the face of the outer ring. The figures for the face runout/OD are provided for P4 and P5 grades. Note that all points on a single circle of the outside ring bore adjacent to the face are calculated based on one revolution. However, the inner ring must remain stationary. Then, the bearing is turned over and the outer side of the ring measured. Finally, the largest measurement is taken away from the smallest to get runout/OD bore tolerance.
Read More
#126377
Brand
Dodge
Model
040766
#126480
Brand
Dodge
Model
042532
#126378
Brand
Dodge
Model
040767
#126372
Brand
Dodge
Model
042283
#130946
Brand
Dodge
Model
042388
| Brand | Cutting Tool Technologies |
| Model | RDC21 TIN |
| Brand | Wiegmann |
| Model | HW-J121206CHTL |
| Brand | MasterDrive |
| Model | 3/B120 |
| Brand | Dormer Pramet |
| Model | 5971809 |
| Brand | Pfannenberg |
| Model | 13383644375 |
| Brand | Pfannenberg |
| Model | 13382341159 |
| Brand | Whitney Tool |
| Model | 15597 |
| Brand | Cooper Wiring |
| Model | GFI12A166 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 117869
Awesome transaction
Great company to do business with. Transaction went smooth and quick!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/