We never sell your data to third parties
Dodge 123363 INS-SCM-211 ball bearing insert with 2-11/16" bore, medium duty set screw locking, and DualGuard seals with flingers. Wide inner ring design, cast iron cage, and 5.1181" OD. General purpose, non-expansion, 3000 rpm max, relubricatable.
MODEL INS-SCM-211
Contact supplier for technical support on: +1-864-284-5700
$266.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Bearing type
Ball, ball
Bore
2 11/16 in
Bore Diameter
2-11/16"
Cage
Cast iron
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Finish
Uncoated
Greasable
Yes
High temp
No
Housing Type
Ball bearing insert (INS)
I.D.
2-11/16 in
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
Set screw medium duty (65° setscrew angle)
Max RPM
3000 rpm
Max Speed
1750 RPM
Maximum Speed
1750 RPM
O.D. (in)
5.1181
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Seal Type
DualGuard seals
Shaft attachment
Setscrew
Shaft diameter
2.6875 in
Static load capacity
11108 lbf, 49410.846 N
Suitable for high temperature
No
Suitable for washdown
No
Type
Ball bearing insert
Specifications
- Catalog Number: 123363
- Engineering Number: INS-SCM-211
- Housing Type: Ball Bearing Insert
- Bore Size: 2-11/16" (68.263mm)
- Locking Type: Set Screw
- Duty Rating: Medium Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Medium Duty Ball
- Weight: 4.7400 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
| Brand | Littelfuse |
| Model | 1003R1C5.5 |
| Brand | Timken Drives |
| Model | 11719 |
| Brand | Champion |
| Model | 405-2 |
| Brand | JW Winco |
| Model | 11T8WP3N |
| Brand | Cle-Line |
| Model | C23368 |
| Brand | Timken Drives |
| Model | 11929 |
| Brand | U.S.Tsubaki |
| Model | C2080HPCL |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/