We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 125500 P2B-VSC-008 two-bolt pillow block bearing with 1/2" bore, 65 degree set screw locking, intermediate duty rating, 203 series ball bearing insert, cast iron housing, ProGuard lip seal, non-expansion fixed design. 1/8" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-VSC-008
Contact supplier for technical support on: +1-864-284-5700
$51.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
203 series
Base to center height
1.0600 in, 26.924 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.0600 in, 103.124 mm
Bolt to bolt min
3.2500 in, 82.55 mm
Bore
1/8 in
Bore length
1.0000 in, 25.4 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1/2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
5000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
0.5000 in
Standoff housing
No
Static load capacity
1079 lbf, 4799.631 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1/2" (12.7mm) with 203 series ball bearing insert
- Locking Method: 65 degree set screw for secure shaft attachment
- Duty Rating: Intermediate duty with ProGuard lip seal protection
- Configuration: Non-expansion (fixed) design for shaft positioning
- Speed Rating: Up to 5,000 RPM maximum
- Applications: General industrial machinery, conveyors, and equipment requiring reliable shaft support
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125539
Brand
Dodge
Model
P2B-DL-012
#126910
Brand
Dodge
Model
P2B-VSC-008
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#2271862
Brand
Browning
Model
767675
#276875
Brand
NTN Bearing
Model
ARP-1/2
| Brand | U.S.Tsubaki |
| Model | D100Q14 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/