We never sell your data to third parties
Dodge 125565 WSTU-VSC-203 wide slot take-up bearing with 2-3/16" bore, set screw locking, intermediate duty cast iron housing, 211 series ball bearing. DualGuard seals with flingers, non-expansion design for belt tensioning applications. Relubrication enabled, general purpose use.
MODEL WSTU-VSC-203
Contact supplier for technical support on: +1-864-284-5700
$209.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
211 series
Bearing Series
211 series ball bearing
Bearing type
Ball, ball
Bore
2 3/16 in
Bore Diameter
2-3/16"
Bore length
2.2200 in, 56.388 mm
Configuration
Non-expansion (fixed)
Duty
Intermediate duty
Duty Rating
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron Class 25/30
Housing option
Cast iron
Housing type
Wide-slot take-up
Housing Type
Wide-slot take-up frame
I.D.
2 3/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Method
Set screw with 65° angle
Lubrication type
Grease
Max Speed
2500 RPM
Maximum Speed
2, 500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seal Type
ProGuard lip seal
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.1875 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
WS-502
Type
Wide slot take up
Specifications
- Catalog Number: 125565
- Engineering Number: WSTU-VSC-203
- Housing Type: Wide Slot Take Up
- Bore Size: 2-3/16" (55.562mm)
- Locking Type: Set Screw
- Duty Rating: Intermediate Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 9.9800 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#129457
Brand
Dodge
Model
WSTU-SXR-207-NL
#5003766
Brand
Dodge
Model
WSTU-DL-60MS
#791917
Brand
Dodge
Model
WSTU-SCMED-55M
#131764
Brand
Dodge
Model
WSTU-SC-207-HT
#130138
Brand
Dodge
Model
WSTU-SC-207
#2272491
Brand
Browning
Model
767486
#2255818
Brand
SealMaster
Model
700752
#12131
Brand
AMI Bearings
Model
UCST211-35
| Brand | MRO Supply |
| Model | 1x10 |
| Brand | Whitney Tool |
| Model | 15350 |
| Brand | MRO Supply |
| Model | RSKR041A |
| Brand | MRO Supply |
| Model | 3/8x36 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/