We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 125890 F4B-SC-40M four-bolt flange mounted ball bearing with 40mm bore. Cast iron housing with set screw locking mechanism. Standard duty rating with DualGuard seals. Non-expansion fixed mounting configuration. 208 series. 40mm bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-SC-40M
Contact supplier for technical support on: +1-864-284-5700
$139.03 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
208 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
4.0000 in, 101.6 mm
Bolt to bolt min
4.0000 in, 101.6 mm
Bore
40mm
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 4/9 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
40.0000 mm
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange mounted configuration
- Bore Diameter: 40mm
- Locking Mechanism: Set screw with 65-degree angle for maximum holding force
- Housing Material: Cast iron for general purpose applications
- Duty Rating: Standard duty for normal industrial loads
- Expansion Type: Non-expansion (fixed) - locates shaft position
- Seal Type: DualGuard seals with flingers for contamination protection
- Bearing Series: 208 series ball bearing insert
- Max Speed: 3500 RPM
- Weight: 4.15 lbs
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#128656
Brand
Dodge
Model
F4B-SC-40M
#792194
Brand
Dodge
Model
128367
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#125623
Brand
Dodge
Model
P2B-DLB-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#2257468
Brand
SealMaster
Model
SF-208
#270019
Brand
NTN Bearing
Model
UCF208D1
| Brand | Cleveland |
| Model | C83572 |
| Brand | Te-Co |
| Model | 20510 |
| Brand | RAB Lighting |
| Model | HBLED13B |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/