We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128702 P2B-DL-015 two-bolt pillow block bearing with 15/16" bore, D-Lok concentric clamp collar locking, normal duty cast iron housing, non-expansion (fixed), DualGuard seals, 205 series ball bearing for general industrial applications. 15/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DL-015
Contact supplier for technical support on: +1-864-284-5700
$117.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt centerline range
3 5/8 inch-4 3/8 inch
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
15/16 in
Bore length
1.4400 in, 36.576 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
15/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
7500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
1 7/16 inch
Shaft diameter
0.9375 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 15/16" (23.812mm)
- Locking Type: D-Lok concentric clamp collar with single Allen wrench cap screw
- Duty Rating: Normal duty for standard industrial loads
- Bearing Series: 205 series ball bearing with wide inner ring
- Expansion Type: Non-expansion (fixed) - locks shaft axially
- Seal Type: DualGuard single lip seal with rubberized flinger
- Max Speed: 7,500 RPM
- Applications: General purpose industrial machinery, provides concentricity between bearing and shaft with no shaft marring
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read more
#132410
Brand
Dodge
Model
P2B-DL-015
#143577
Brand
Dodge
Model
35S15R
#123366
Brand
Dodge
Model
P2B-SC-015
#131371
Brand
Dodge
Model
P2B-DL-207
#143290
Brand
Dodge
Model
26S15R
| Brand | Airmaster |
| Model | 20721 |
| Brand | Fastube |
| Model | CN1 |
| Brand | NSI Industries |
| Model | CD3 |
| Brand | Champion |
| Model | PTC3-1/4 |
| Brand | Drillco |
| Model | 174F21636 |
| Brand | Fibox |
| Model | ALBP66 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/