We never sell your data to third parties
Koyo 5206 2RS is a double-row angular contact ball bearing with a 30 mm bore and 62 mm OD. It features double rubber seals for contamination protection. This light series bearing accommodates combined radial and axial loads in compact applications such as pumps and gearboxes.
MODEL 5206 2RS
$63.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore
23.8
I.D.
30 mm
O.D.
62 mm
| Bearing No. | 5206 2RS | |
| Boundary dimensions(mm) | d | 30 |
| D | 62 | |
| B | 23.8 | |
| r(min) | 1 | |
| Basic load ratings(kN) | Cr | 31.7 |
| C0r | 18.3 | |
| Fatigue load limit(kN) | Cu | 0.950 |
| Limiting speeds(min-1) | Grease lub. | 6400 |
| Oil lub. | 8600 | |
| Load center spread(mm) | a | 30.8 |
| Mounting dimensions(mm) | da(min) | 35.5 |
| da(max) | 38.6 | |
| Da(max) | 56.5 | |
| ra(max) | 1 | |
| (Refer.)Mass(kg) | 0.290 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#208051
Brand
Nachi Bearing
Model
5206-2NS
| Brand | MRO Supply |
| Model | 5404-N-02X0.750-B |
| Brand | Chicago-Latrobe |
| Model | 57728 |
| Brand | Chicago-Latrobe |
| Model | 48252 |
| Brand | Timken Belts |
| Model | R8V2000-5 |
