We never sell your data to third parties
Koyo 6322 is a 63 series single-row deep groove ball bearing with a 110 mm bore, 240 mm OD, and 50 mm width. Open type design for high-speed applications. Suitable for electric motors, pumps, fans, and general industrial rotating machinery.
MODEL 6322
$826.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore
4.331 in / 110 mm
Brand
KOYO
Harmonized Tariff Code
8482.10.50.68
Inch - Metric
Metric
Internal Clearance
C3-Loose
Internal Special Features
No
Manufacturer Item Number
6322ZC3
Maximum Capacity / Filling Slot
No
Other Features
Deep Groove
Outer Race Width
1.969 Inch / 50 Millimeter
Outside Diameter
9.449 Inch / 240 Millimeter
Precision Class
ABEC 1 / ISO P0
Rolling Element
Ball Bearing
Snap Ring
No
Type
Single Row Ball Bearings
UNSPSC
31171504
| Bearing No. | 6322 | |
| Boundary dimensions(mm) | d | 110 |
| D | 240 | |
| B | 50 | |
| r(min) | 3 | |
| Basic load ratings(kN) | Cr | 257 |
| C0r | 180 | |
| Fatigue load limit(kN) | Cu | 13.3 |
| factor | f0 | 13.2 |
| Limiting speeds(min-1) | Grease lub. | 2700 |
| Oil lub. | 3200 | |
| Mounting dimensions(mm) | da(min) | 123 |
| Da(max) | 227 | |
| ra(max) | 2.5 | |
| (Refer.)Mass(kg) | 9.54 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#209007
Brand
Nachi Bearing
Model
6322C3
#320153
Brand
SKF Bearing
Model
6322/C3
#2302847
Brand
Rollway
Model
6322 C3
#5034430
Brand
NSK Bearings
Model
6322C3
#278490
Brand
NTN Bearing
Model
6322C3
#2176308
Brand
FAG Bearing
Model
6322.C3
| Brand | PEER Bearing |
| Model | P-209-HA |
