We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo FC-16 drawn cup roller clutch with a 16.006 mm bore, 21.989 mm outer diameter, and 16 mm width. This one-way clutch allows free rotation in one direction and locks in the opposite direction. Designed for compact indexing, overrunning, and backstopping applications in industrial machinery.
MODEL FC-16
$29.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Design
Roller Clutch
Clamp Torque
182 lbf
I.D.
16 mm
O.D.
22 mm
O.D. of Housing [MIN]
1.2 in
Oil Hole
w/o Oil Hole
Origin
Roller Clutches
Precision Ground
Yes
Self Aligning
No
Width
16 mm
- Best used for light duty torque applications that require a one way clutch
- RC (inch) and FC FCS FCL (metric) are clutches capable for rotational torque only
- RCB (inch( and FCB FCBL (metric) are clutch bearings capable for rotational torque and radial load
- "-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC FCS FCL FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Carter |
| Model | SFH-112-B |
| Brand | Consolidated Bearings |
| Model | NU-217E C/4 |
| Brand | NK North America Inc. |
| Model | K0738.3A41X50 |
| Brand | Cleveland |
| Model | C39174 |
| Brand | Greenfield Threading |
| Model | 330085 |
| Brand | Bestorq |
| Model | 4/3VX710 |
