We never sell your data to third parties
Koyo M-11101 full complement drawn cup needle roller bearing, open type, with a 0.6899" inner diameter, 0.8755" outer diameter, and 0.625" width. This bearing uses a full complement of needle rollers for maximum load capacity in a compact radial envelope.
MODEL M-11101
$22.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Design
Outer Ring & Roller Assembly
Housing Bore [MAX]
0.8755 in
Housing Bore [MIN]
0.8745 in
I.D.
11/16 in
Limiting Speed - Oil
4200 rpm
O.D.
7/8 in
Oil Hole
w/o Oil Hole
Origin
Needle Radial
Precision Ground
No
Self Aligning
No
Width
5/8 in
Working Load
3460 lbf
- Best used to provide maximum radial load capacity (full complement of rollers no cage) for thin cross section applications
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bestorq |
| Model | XPA2207 |
| Brand | Champion |
| Model | 308M-27X3-P |
