We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo WJ-323812 needle roller cage assembly with a 60.325 mm bore, 50.8 mm outside diameter, and 0.75 inch width. This inch-series cage assembly is designed for use in industrial machinery requiring compact needle roller guidance.
MODEL WJ-323812
$30.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Design
Cage & Roller Assembly
Housing Bore [MAX]
2.3761 in
Housing Bore [MIN]
2.3754 in
I.D.
2 in
Limiting Speed - Oil
8600 rpm
O.D.
2 3/8 in
Oil Hole
w/o Oil Hole
Precision Ground
Yes
Self Aligning
No
Width
3/4 in
- Best used for applications that require maximum radial load capacity and a thin cross section
- Most sizes use a hardened steel cage (no callout)
- A polymer cage (TN in suffix) is used on our smallest metric sizes (4-8mm bore)
- The housing bore and shaft must be hardened and machined
- Available in inch (WJ) and metric (K) sizes
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Deublin |
| Model | 1790-001-112 |
| Brand | NSI Industries |
| Model | TS500-2 |
| Brand | Fanuc |
| Model | A06B-0533-B001#7000 |
| Brand | United Abrasives |
| Model | 60775 |
| Brand | Gates Rubber |
| Model | CP-100-H |
| Brand | Telemecanique |
| Model | XS630B1MAU20 |