We never sell your data to third parties
Smith Bearing FYR-9 Smith-Trax Idler Roller with 9.000" roller OD, 3.755" bore, and 4.750" roller width. Features a tapered roller bearing (TRB) design with a dynamic thrust load rating of 147,000 lbs and radial basic dynamic rating of 134,230 lbs at 500 hrs and 33 rpm. Overall width is 5.000" with a flange OD of 9-15/16" and flange width of 23/32". Suitable for heavy-duty industrial applications.
MODEL FYR-9
Contact supplier for technical support on: 800-932-0076
Returnable: See conditions
Bearing Type
TRB
Bore Diameter
3.755
Bore Diameter Tolerance
+0.001/-0.000
Dynamic Thrust Load Rating (lbs) 500 hrs. 33 rpm.
147,000
Flange O.D.
9-15/16
Flange Width
23/32
Overall Width
5.000
Overall Width Tolerance
+.005/-.010
Radial Basic Dynamic Rating (lbs) 500 hrs. 33 rpm.
134,230
Roller O.D.
9.000
Roller Width
4.750
Shoulder Length
0.125
Shoulder Width Or End Plate Diameter
5-1/2
SMITH Bearing Number
FYR-9
Yoke Rollers The FYR-9 Smith-Trax Idler Roller is a high-performance bearing solution designed to meet the rigorous demands of both aerospace and industrial applications. Engineered with precision and built to last, this idler roller is an ideal choice for systems requiring reliable motion and load-bearing capabilities.
Key Features
| Precision Engineering | Manufactured by Smith Bearings, a leader in precision needle roller bearings, ensuring exceptional quality and reliability. |
|---|---|
| Durable Construction | Designed with high-strength materials to withstand harsh operating environments and enhance durability. |
| Versatile Application | Suitable for various applications, including conveyor systems and automated machinery, where idler rollers are essential. |
| Compatibility | The FYR-9 is compatible with a wide range of yoke roller systems, making it a versatile choice for many setups. |
| High Load Capacity | Designed to accommodate significant thrust loads while maintaining smooth rotation, ensuring efficient operation. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, packaging equipment, and robotic automation where precise motion control is crucial. |
|---|---|
| Aerospace Components | Approved for aerospace applications, providing the reliability needed for critical airframe and engine systems. |
| Corrosive Environments | Can be utilized in environments where corrosion resistance is necessary, making it suitable for various industrial applications. |
Benefits
| Enhanced Performance | Provides smooth operation and reduced friction, leading to improved overall system efficiency. |
|---|---|
| Long Lifespan | Built to withstand wear and tear, ensuring prolonged service life and reducing maintenance costs. |
| Trusted Reliability | Backed by Smith Bearings’ reputation for quality, ensuring peace of mind in critical applications. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.