We never sell your data to third parties
SKF TMHC 110E is a hydraulic puller kit for bearing maintenance. The kit includes a hydraulic cylinder, pump, and pulling legs for safe removal of bearings and other press-fit components. Weighs 34.6 lb.
MODEL TMHC 110E
$1,812.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Arms
Set 1, TMHP 10E-9 with arm length 140 mm;Set 2, TMHP 10E-10 with arm length 190 mm
Case Dimensions (l X H X W)
580 x 410 x 70 mm
Claw Height
8 mm
Claw Length
15 mm
Claw Width
25 mm
Coating
Black phosphated, Hydraulic spindle with trivalent chromium parts
Colour
Black;Silver
Dismounting Force Generation
Hydraulic spindle, TMHS 100
Material
Alloy engineering steels, hardened and tempered
Pack Height
80 mm
Pack Length
650 mm
Pack Width
420 mm
Piston Stroke Hydraulic Spindle
80 mm
Puller Adaptor Thread
UN 1.5 x 16 tpi
Pulling Force (max)
100 kN
Reach, using arms (max)
Set 1: 65 mm;Set 2: 115 mm
Reach, using separator (max)
250 mm, using provided extension rods
Recommended Storage Temperature
5-40 °C
Relative Humidity
max 75%
Separator Height
25 mm
Shaft diameter range, using separator
20 to 100 mm
Spindle Nose Piece
yes, ⌀ 30mm
Suitable for Bearing Dismounting from A Sleeve (adapter or Withdrawal Sleeve)
Yes
Suitable for Bearing Dismounting from A Tapered Seating (conical Shaft)
Yes
Suitable for Bearing Type(s)
All
Suitable for Workpiece Dismounting from A Blind Arrangement (housing with Shaft)
No
Suitable for Workpiece Dismounting from A Cylindrical Seating (straight Shaft)
Yes
Suitable for Workpiece Dismounting from A Housing
No
Total Number of Arms in Kit
2 sets of 3
Total Spindle Length
505 mm, incl. 2 available extension pieces
Workpiece outer diameter range, using arms
Set 1: 50 to 110 mm;Set 2: 75 to 170 mm
Workpiece outer diameter range, using separator
26 to 160 mm
The TMHC 110E is a hydraulic puller kit that comnbines a jaw puller and a strong back puller. The kit includes two arm sets with different lengths that can be used in 2-arm or 3-arm configuration and a back puller with a maximum reach of 250 mm (9.8 in.). The hydraulic spindle with safety valve enables safe and effortless dismounting for various bearings and components. The spring-loaded centre piece and self-locking puller arms further support safe and easy puller operation.
SKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreSKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-506135 |
SKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreSKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF