We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 3314 E double-row angular contact ball bearing with 2-3/4 in bore and 5-8/9 in OD. Enhanced capacity (E design) accommodates combined radial and axial loads in both directions. Suitable for pumps, gearboxes, and industrial machinery.
MODEL 3314 E
$620.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
2 3/4 in
Inner Diameter (mm)
70.000
O.D. (in)
5 8/9
Outer Diameter (mm)
150.000
Pack Height
165 mm
Pack Length
160 mm
Pack Width
80 mm
Width (mm)
63.500
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#208800
Brand
Nachi Bearing
Model
5314
#284169
Brand
NTN Bearing
Model
3314
#284059
Brand
NTN Bearing
Model
5314
#2889838
Brand
Rollway
Model
3314
#2171297
Brand
FAG Bearing
Model
3314
#2066073
Brand
SKF Bearing
Model
3314 A
#2174649
Brand
FAG Bearing
Model
3314-BD
#5033106
Brand
NSK Bearings
Model
5314J
| Brand | SolaHD |
| Model | SCP-MDC |
| Brand | Regal Cutting Tools |
| Model | 030230TC |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF