We never sell your data to third parties
Nachi Bearing 51108 Single-direction Thrust Ball Bearing Flat back-face type 40mm Inner Diameter x 60mm Outer Diameter x 13mm Width Thrust Ball Bearing
MODEL 51108
$21.58 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore Type
Cylindrical
Cage Material
JIS SPCC Steel
Contact Angle (Deg)
N/A
Dynamic Load Capacity (N)
26900
Grease Fill
No Fill
Inner Diameter (mm)
40
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
CN/C0
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
3500
Limiting Speed - Oil (RPM)
5300
Max Operating Temp.
120°C (248°F)
Outer Diameter (mm)
60
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Snap Ring
N/A
Static Load Capacity (N)
63000
Universally (Flush) Ground
N/A
Width (mm)
5300
Ball thrust bearings consist of two grooved plates with a ball and cage assembly. Depending upon the size, they have a polyamide (G) or stamped steel cage. These bearings can sustain a high axial load in only one direction and are not intended for high speed or misalignment applications. Heavy axial loads in one direction. High rigidity. Separable. Long life.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Nachi Bearing |
| Model | 6009NRC3 |