We never sell your data to third parties
INA SCE87 Drawn cup needle bearing
MODEL SCE87
$6.82 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
O.D.
0.688
Specifications
| F w | 1/2 inch | |
|---|---|---|
| F w | 12,7 mm | |
| D | 0,688 inch | |
| D | 17,462 mm | |
| C 1 | 0,438 inch | |
| C 1 | 11,112 mm |
| m | 0,013 lbs | Mass |
|---|---|---|
| m | 6 g | Mass |
| C r | 820 lbf | Basic dynamic load rating, radial |
| C r | 3650 N | Basic dynamic load rating, radial |
| C 0r | 890 lbf | Basic static load rating, radial |
| C 0r | 3950 N | Basic static load rating, radial |
| n G | 19500 1/min | Limiting speed |
| n B | 14700 1/min | Reference speed |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | FAG Bearing |
| Model | 23040E1A.M.C3 |
