We never sell your data to third parties
INA TC4052 Thrust needle cage assembly
MODEL TC4052
Returnable:No
O.D.
2 1/2
Specifications
| D c1 | 2 1/2 inch | |
|---|---|---|
| D c1 | 63,5 mm | |
| D c | 3,25 inch | |
| D c | 82,55 mm | |
| D w | 0,078 inch | |
| D w | 1,984 mm |
| E a | 3,161 inch | |
|---|---|---|
| E a | 80,3 mm | |
| E b | 2,571 inch | |
| E b | 65,3 mm |
| m | 0,042 lbs | Mass |
|---|---|---|
| m | 0,019 kg | Mass |
| C a | 6200 lbf | Basic dynamic load rating, axial |
| C a | 27500 N | Basic dynamic load rating, axial |
| C 0a | 37700 lbf | Basic static load rating, axial |
| C 0a | 168000 N | Basic static load rating, axial |
| n G | 3950 1/min | Limiting speed |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.