We never sell your data to third parties
FAG 6412 deep groove ball bearing with 65mm bore and 160mm OD. This open bearing is designed for high-speed operation and accommodates radial and axial loads. Suitable for electric motors, pumps, and gearboxes. Precision German engineering from Schaeffler.
MODEL 6412
$392.01 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
2.559
Limiting speed
6800 1/min n G
Mass
2, 83 kg m
O.D.
6.299
Reference speed
6400 1/min n B
Specifications
| d | 60 mm | |
| D | 150 mm | |
| B | 35 mm |
| D 1 | 126, 3 mm | |
| D a max | 136 mm | |
| d 1 | 95, 1 mm | |
| d a min | 74 mm | |
| r a max | 2, 1 mm | |
| r min | 2, 1 mm |
| Mass | 2, 83 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 115000 N | C r |
| Basic static load rating, radial | 69000 N | C 0r |
| Limiting speed | 6800 1/min | n G |
| Reference speed | 6400 1/min | n B |
| Fatigue limit load, radial | 4450 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | IKO Bearing |
| Model | OS40504 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-797022 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830852 |
