We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
FAG 53228 single direction thrust ball bearing with 140mm bore and 200mm OD. Designed for axial loads in one direction, this bearing offers reliable performance in vertical shaft applications. Manufactured by Schaeffler, it meets ISO precision standards for industrial machinery.
MODEL 53228
$2,260.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Round
Cage Material
Steel
Closure Type
Open
Fillet Radius
1.5 mm
Finish Coating
Uncoated
I.D.
5.512
Internal Clearance
C0
Max Rpm
2110 rpm
O.D.
7.874
Operating Temperature Range
-30 to +150°C
Overall Width
1.9063 in
Precision Rating
Not Rated
Product Type
Ball Thrust Bearings
Radial Dynamic Load Capacity
190000 N
Row Type Fill Slot
Single Row Non-Fill Slot
Series
532
Standards Met
DIN 711/ISO 104
Thrust Bearing Type
Single-Direction
Specifications
| d | 140 mm | |
| D | 200 mm | |
| T | 48, 6 mm |
| A | 87 mm | |
| D 1 | 143 mm | |
| D a max | 170 mm | |
| d 1 | 197 mm | |
| d a min | 176 mm | |
| R | 160 mm | |
| r a max | 1, 5 mm | |
| r min | 1, 5 mm |
| Mass | 4, 25 kg | m |
|---|---|---|
| Basic dynamic load rating, axial | 190000 N | C a |
| Basic static load rating, axial | 570000 N | C 0a |
| Minimum load factor | 1, 9 | A |
| Limiting speed | 2110 1/min | n G |
| Fatigue limit load, axial | 19200 N | C ua |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | PT Coupling |
| Model | 86003100 |
