We never sell your data to third parties
FAG 222S.600 split spherical roller bearing with a 3/5 in bore. Designed for easy mounting and dismounting in applications where shaft access is limited. This bearing accommodates misalignment and high radial loads. Ideal for conveyor systems, fans, and industrial machinery.
MODEL 222S.600
$7,125.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Straight
Cage
Outer Ring Guided
Cage Material
Polyamide
Closure Type
Open
Fillet Radius
4.00 mm
Finish Coating
Uncoated
I.D.
3/5 in
Internal Clearance
C0
Lubrication Hole Type
Lubrication Groove & Hole
Max Rpm
900 rpm
O.D.
310 mm
Outer Ring Type
Split
Overall Width
128 mm
Precision Rating
Not Rated
Product Type
Spherical Roller Bearings
Series
222S
Specifications
| d | 152, 4 mm | |
| d | 6 inch | |
| D | 310 mm | |
| C | 86 mm |
| B | 128 mm | |
| r min | 4 mm |
| Mass | 36, 9 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 965000 N | C r |
| e | 0, 26 | |
| Y 1 | 2, 64 | |
| Y 2 | 3, 93 | |
| Basic static load rating, radial | 1370000 N | C 0r |
| Y 0 | 2, 58 | |
| Limiting speed | 940 1/min | n G |
| Fatigue limit load, radial | 94000 N | C ur |
| Permissible axial load, for inner ring without axial abutment | 22200 N | F a max |
| Tightening torque per clamping screw | 69 Nm | M i |
| Tightening torque per clamping screw | 35 Nm | M a |
| Designation, spherical roller bearing, unsplit | 22234K | |
| Designation, adapter sleeve | H3134. 600 | |
| Designation, adapter sleeve, US design | SNW34. 600 | |
| Designation, plummer block housing, US design | SAF534/6 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Remke |
| Model | RSRS-005 |
