We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
FAG B7206C.T.P4S.UL Super Precision Angular Contact Ball Bearing
MODEL B7206C.T.P4S.UL
$328.66 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ball Screw Application
Not for Ball Screws
Bearing Material
Steel (Balls)
Bearing Type
Standard OR relieved IR symmetrical
Bore Type
Straight
Cage Material
Phenolic Resin
Closure Type
Open
Contact Angle
15°
Fillet Radius
1 mm
Finish Coating
Uncoated
I.D.
1 1/6 in
Internal Clearance
C0
Max Rpm
38000 rpm
O.D.
62 mm
Operating Temperature Range
-30 to +100°C
Overall Width
16 mm
Precision Rating
ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2)
Product Type
Spindle & Precision Machine Tool Angular Contact Bearings
Radial Dynamic Load Capacity
23.2 kN
Radial Static Load Capacity
14.6 kN
Series
72
Snap Ring Included
Without Snap Ring
Spindle bearings B72..-C, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#831235
Brand
NTN Bearing
Model
7206CG1UJ74
#5035069
Brand
NSK Bearings
Model
7206CTRSULP4Y
#1495274
Brand
Koyo Bearing
Model
7206C-5GLFGP4
| Brand | MROSupply Fasteners |
| Model | FSTPCK-592448 |
| Brand | SMC |
| Model | VP742-3DZ1-04TA |
| Brand | Nachi Bearing |
| Model | 22311EXQW33VCS100 |
| Brand | Superlok |
| Model | SGBV-M8N |
| Brand | Turck |
| Model | NI4-GT12-ADZ32X-B3131/S34 |