We never sell your data to third parties
IPTCI UCFCX6-18 4-Bolt Piloted Flange Set Screw mounted ball bearing unit with 1-1/8" bore. Standard lip seal. Wide inner race bearing insert with set screw locking. Cast iron housing. Suitable for precision alignment applications and OEM replacement.
MODEL UCFCX6-18
Contact supplier for technical support on: 704 588 1091
$28.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
A
5
Bolt Used
3/8
G
7/8
I
5/16
J
3/8
K
3/8
Medium duty
Yes
P
4 1/8
S
15/32
Unit Number
UCFC X06-18
Z
1 5/16
4-Bolt piloted flange units with set screw lock.
- Medium duty
- Wide inner race bearing with greater load carrying capacity than standard duty
- B-type seals
- L3-type seals available in some sizes
Unit Number: UCFC X06-18
| A | P | S | J | K | G | F | I | Z | Bi | N | M | Bolt Used |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 4 1/8 | 15/32 | 3/8 | 3/8 | 7/8 | 3.375 | 5/16 | 1 5/16 | 1.6890 | 0.6890 | 1.0000 | 3/8 |
Dimensions are in Inches.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MCR Safety |
| Model | FRMCL2LX3 |
| Brand | Harwal |
| Model | 48 x 63 x 10U41 |
| Brand | PEER Bearing |
| Model | PER.6201-2RLD |
| Brand | Harwal |
| Model | 160 x 190 x 15A |
