We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Smith Bearing BCR-2-1/4-XC non-metallic bushing cam follower with 2.250" roller OD, 7/8-14 UNF thread, and 1.250" roller width. This sealed and crowned stud-type cam follower features a non-metallic bushing design for maintenance-free operation without lubrication at temperatures from -40°F to 200°F (250°F short duration). The XC suffix indicates a hex socket drive head.
MODEL BCR-2-1/4-XC
Contact supplier for technical support on: 800-932-0076
$72.55 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Eff. Thread Min.
1
Lube Fitting Size
3/16
Min. Boss Dia.
1-13/64
Oil Hole Dia.
5/32
Oil Hole Location
1/2
Recom. Bore
.875
Recom. Bore Tolerance
+.0005/-.0005
Roller O.D.
2.250
Roller O.D. Tolerance
+.000/-.001
Roller Width
1.250
Roller Width Tolerance
+.000/-.005
SMITH Bearing Number
BCR-2-1/4-XC
Stud Dia.
.875
Stud Dia. Tolerance
+.001/-.000
Stud Length
2
Stud Length Tolerance
+.005/-.0005
Thread U.N.F. Class 2A
7/8-14
Cam Followers
- BCR-2-1/4-XC Non-Metallic Bushing Stud Crowned The BCR-2-1/4-XC Non-Metallic Bushing Stud Crowned Cam Follower from Smith Bearings is engineered for precision performance in demanding applications. Designed to meet the stringent requirements of both aerospace and industrial sectors, this cam follower features a non-metallic bushing that enhances durability and minimizes friction, making it ideal for high-load scenarios.
Key Features
- Non-Metallic Bushing: Constructed from advanced engineered plastic, ensuring excellent wear resistance and longevity in corrosive environments.
- Crowned Profile: The crowned design promotes optimal load distribution, reducing stress concentrations and enhancing operational efficiency.
- Precision Engineering: Manufactured to tight tolerances, meeting ISO 9001 and AS 9100 quality standards for superior reliability and performance.
- Versatile Sizing: Available in a 2-1/4 inch size, suitable for various applications requiring precision motion control.
- Low Friction Performance: The design minimizes friction, resulting in smoother operation and reduced maintenance needs.
Applications
- Aerospace Industry: Used in aircraft engines and airframe assemblies, providing reliable performance in critical applications.
- Industrial Machinery: Ideal for use in conveyors, robotics, and material handling systems, enhancing efficiency and operational uptime.
- Corrosive Environments: Perfect for applications where exposure to moisture or chemicals is a concern due to its robust non-metallic construction.
Benefits
- Enhanced Durability: The non-metallic bushing significantly extends the lifespan of the cam follower, reducing the need for frequent replacements.
- Improved Efficiency: The crowned profile and low friction design contribute to smoother operation, leading to increased productivity in manufacturing processes.
- Reliability in Critical Applications: Adherence to strict quality standards ensures consistent performance, making it a trusted choice for aerospace and industrial applications. --- Product information compiled with AI assistance for reference purposes.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Jason Industrial |
| Model | 7/3VX950 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.