We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 077809 P2B-SXRED-45MS two-bolt pillow block bearing with 45mm bore, eccentric locking collar, cast iron housing, QuadGuard seals, 209 series ball bearing, non-expansion design for fixed shaft positioning applications. 45mm bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in Dirty & Dusty Environment applications
MODEL P2B-SXRED-45MS
Contact supplier for technical support on: +1-864-284-5700
$162.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
209 series
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
6.1900 in, 157.226 mm
Bolt to bolt min
5.5000 in, 139.7 mm
Bore
45mm
Bore length
2.1300 in, 54.102 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
45
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
3000 rpm
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
45.0000 mm
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with standard mounting base
- Bore Diameter: 45mm
- Locking Type: Eccentric collar - quarter-turn locking mechanism
- Housing Material: Cast iron construction for general purpose applications
- Duty Rating: Standard duty for normal load applications
- Bearing Series: 209 series ball bearing insert
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal Protection: QuadGuard seals with flingers for enhanced contamination protection
- Applications: Ideal for conveyor systems, general industrial machinery requiring reliable shaft support
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2217729
Brand
Dodge
Model
P2B-SXRED-45MS
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
#792196
Brand
Dodge
Model
128368
#122519
Brand
Dodge
Model
LD-20X12-TUFR
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/