We never sell your data to third parties
Dodge 078394 P2B-SXRB-35M-LLS two-bolt pillow block bearing with 35mm bore, eccentric collar locking, cast iron housing, standard duty, 207 series ball bearing, low torque labyrinth seal, non-expansion design. Suitable for general purpose applications with relubrication capability.
MODEL P2B-SXRB-35M-LLS
Contact supplier for technical support on: +1-864-284-5700
$160.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Base to center height
1.8100 in, 45.974 mm
Bearing Series
207 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
35mm
Bore Diameter
35mm
Bore length
1.9500 in, 49.53 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
35
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Locking Mechanism
Eccentric collar (quarter-turn locking)
Lubrication type
Grease
Max Speed
3500 RPM
Maximum Speed
3500 RPM
Relubrication
Yes
Seal option
Low torque labyrinth seal
Seal type
Labyrinth
Seal Type
Low torque labyrinth seal
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
35.0000 mm
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Static Load Rating
3461 lbf
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 078394
- Engineering Number: P2B-SXRB-35M-LLS
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 35mm (35mm)
- Locking Type: Eccentric Locking
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: Low torque labyrinth seal
- Weight: 3.3900 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#792192
Brand
Dodge
Model
128366
#127074
Brand
Dodge
Model
P2B-SCEZ-107-P
#2217859
Brand
Dodge
Model
P2B-SXRB-35M-LLS
#122519
Brand
Dodge
Model
LD-20X12-TUFR
| Brand | Eklind |
| Model | 28406 |
| Brand | Drillco |
| Model | 280A060 |
| Brand | Bondhus |
| Model | 26712 |
| Brand | Drillco |
| Model | 335E148F |
| Brand | Remke |
| Model | RSR-9627-E |
| Brand | INA Bearing |
| Model | BCE2020 |
| Brand | Cooper Wiring |
| Model | PH45058 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/