We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 079247 P2B-SXRED-104S two-bolt pillow block bearing with 1-1/4" bore and eccentric locking mechanism. Cast iron housing, 207 series ball bearing, non-expansion design with QuadGuard seals. Standard duty rating for general industrial applications. 1-1/4" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in Dirty & Dusty Environment applications
MODEL P2B-SXRED-104S
Contact supplier for technical support on: +1-864-284-5700
$132.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
207 series
Base to center height
1.8800 in, 47.752 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 1/4 in
Bore length
1.9500 in, 49.53 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/4
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
3500 RPM
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 1-1/4" (31.75mm) with 207 series bearing
- Locking Mechanism: Eccentric collar locking for secure shaft attachment
- Expansion Type: Non-expansion (fixed) design for shaft positioning
- Sealing: QuadGuard seals with flingers for enhanced protection
- Duty Rating: Standard duty for general industrial applications
- Maximum Speed: 3500 RPM operating capability
- Weight: 3.67 lbs for installation planning
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read more
#792188
Brand
Dodge
Model
128353
#792190
Brand
Dodge
Model
128355
#2217980
Brand
Dodge
Model
P2B-SXRED-104S
#122519
Brand
Dodge
Model
LD-20X12-TUFR
| Brand | Dodge |
| Model | 037630 |
| Brand | Dodge |
| Model | 117718 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/