We never sell your data to third parties
Dodge 079344 P2B-SLX-20MS two-bolt pillow block bearing with 20mm bore, eccentric collar locking, light duty stamped steel housing, 204 series ball bearing insert, DualGuard seals with flingers, non-expansion fixed design for general purpose applications.
MODEL P2B-SLX-20MS
Contact supplier for technical support on: +1-864-284-5700
$45.65 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
204 series
Base to center height
1.0000 in, 25.4 mm
Bearing Series
204 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
3.0000 in, 76.2 mm
Bolt to bolt min
3.0000 in, 76.2 mm
Bore
20mm
Bore Diameter
20mm
Bore length
1.2200 in, 30.988 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Stamped Steel
Housing construction
Solid
Housing material
Stamped Steel
Housing Material
Stamped steel
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
20
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Mechanism
Eccentric collar (quarter-turn locking)
Lubrication type
Grease
Max Speed
5000 RPM
Mounting
Non-expansion (fixed)
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal Protection
DualGuard seals
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
20.0000 mm
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 079344
- Engineering Number: P2B-SLX-20MS
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 20mm
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Weight: 0.7400 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#132883
Brand
Dodge
Model
F2B-SCEZ-012-PCR
#792185
Brand
Dodge
Model
128363
#2218025
Brand
Dodge
Model
P2B-SLX-20MS
#123364
Brand
Dodge
Model
P2B-SC-012-NL
#133985
Brand
Dodge
Model
F2B-SCEZ-20M-PCR
| Brand | Pfannenberg |
| Model | 13383636158 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/