We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The McGill CF 1 1/4 SB THT is a 1-1/4 inch roller diameter standard stud CAMROL cam follower with LUBRI-DISC seal and hex hole drive. Constructed from 52100 bearing steel with black oxide finish. Used in cam mechanisms, packaging machinery, and conveyors.
MODEL CF 1 1/4 SB THT
This product has a minimum order quantity of (25 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 800-626-2120
$104.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(25 minimum)
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Clamping Torque (in-lbf)
350
Dynamic Load Rating (lb)
3930
Height
2.18
Hex Socket (in)
0.25
Length
1.5
Lubrication Fitting Size (in)
0.1875
Material
Bearing Steel, Black Oxide Finish
Minimum Thread Length (in)
0.63
Oil Hole Center (in)
0.313
Platform
CAMROL
Roller Diameter (in)
1.25
Roller Width (in)
0.75
Rolling Element
Needle Roller - Full Complement
Stud Type
Standard Stud
Threads
1/2-20
Tolerance Class
P0 Equivalent
Regal Beloit Mcgill&Reg; CF 1 1/4 SB THT
UPC: 726166088682 | UNSPSC: 31171530 | GTIN:
Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners
McGill CAMROL Cam Follower, Cylindrical OD Relubricatable Stud Mount Roller, Series: CF Series, 1-1/4 in Roller Dia, 3/4 in Roller Width, 1/2 in Stud Dia, 1-1/4 in Stud Length, 1/2-20 Thread, 5/8 in Thread Length, 2300 lb Static/3930 lb Dynamic, 3100 rpm Maximum, Standard Stud Type, Sealed Closure, Head Hex, Black Oxide
Features:
- Needle rolling element
- LUBRI-DISC seal
Specs:
| Stud Type | Standard |
|---|---|
| Stud Diameter | 1/2 in |
| Stud Length | 1-1/4 in |
| Roller Width | 3/4 in |
| Roller Diameter | 1-1/4 in |
| Thread Length | 5/8 in |
| Head Type | Hex |
| Load Capacity | 2300 lb Static/3930 lb Dynamic |
| Closure Type | Sealed |
| Thread Size | 1/2-20 |
| Finish | Black Oxide |
| Maximum Speed | 3100 rpm |
| Type | Cylindrical OD Relubricatable Stud Mount Roller |
| Series | CF Series |
Packaging:
| Length | 1.5 in |
|---|---|
| Width | 1.75 in |
| Height | 2.18 in |
Limited
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Coilhose |
| Model | 29-4F38-0D |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-241226 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-747338 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-565127 |
